Abilis CPX System Log file allows to register all the events pertinent to the global working mode.

The System Log is saved on the HD/CF in the file CPX.LOG (fixed size is 50 Kbytes) and updated every time that an event to save occurs. New events are stored and the oldest ones are progressively deleted.

The System Log can be displayed in a running Abilis using the following command. The command d l ? shows the syntax.

[18:01:34] ABILIS_CPX:d l

Current Local Time: Friday 14/01/2011 09:49:59 (UTC+1.00)

14/01/2011  9:49:05 [00257] I: SYSTEM LOG CLEARED
14/01/2011  9:49:11 [00033] WARM START
14/01/2011  9:49:38 [00103] -------------------- NEW RUN --------------------
14/01/2011  9:49:40 [00362] I: WATCHDOG MFIDE3 FW Rev. 11
14/01/2011  9:49:40 [00163] I: SYSTEM RESET
14/01/2011  9:49:40 [00366] W: LICENCE, FILE MISSING
14/01/2011  9:49:40 [00248] I: USB PCI7/2 UHCI DE00 9
14/01/2011  9:49:40 [00150] W: MISSING STHUSB-I.BIN
14/01/2011  9:49:42 [00242] I: BRI4-1 DSP:0 DWNL OK
14/01/2011  9:49:46 [00291] I: DSP test start
14/01/2011  9:49:46 [00292] I: DSP test end
14/01/2011  9:49:46 [00286] I: CTIR ENABLED
14/01/2011  9:49:47 [00055] SYSTEM STARTED
14/01/2011  9:49:47 [00104] AUTO SAVE IN PROGRESS
14/01/2011  9:49:47 [00091] I: Pad-1 L1-ST:dn DCD:dn DTR:UP
14/01/2011  9:49:47 [00345] I: Dhcp-1 ST:in
14/01/2011  9:49:47 [00259] I: PoeAc-1 ST:ee
14/01/2011  9:49:47 [00090] I: X25-999 Layer3:down
14/01/2011  9:49:47 [00089] I: X25-999 Layer2:cg  
14/01/2011  9:49:47 [00092] I: X25-999 PLink:ln SLink:RD
14/01/2011  9:49:47 [00092] I: Ip-3 PLink:d1 SLink:RD
14/01/2011  9:49:47 [00092] I: Pv-1 PLink:d1 SLink:ln
14/01/2011  9:49:47 [00092] I: Pv-2 PLink:d1 SLink:ln
14/01/2011  9:49:47 [00092] I: Ip-4 PLink:d1 SLink:ln
14/01/2011  9:49:47 [00230] I: Adsl-1 ST:DOWN
14/01/2011  9:49:47 [00346] I: DhcpC-1 ST:RD
14/01/2011  9:49:47 [00092] I: Pv-5 PLink:d1 SLink:ln
14/01/2011  9:49:47 [00092] I: Pv-6 PLink:d1 SLink:ln
14/01/2011  9:49:47 [00092] I: Ip-8 PLink:d1 SLink:ln
14/01/2011  9:49:47 [00092] I: Ip-9 PLink:d1 SLink:ln
14/01/2011  9:49:48 [00107] AUTO SAVE OK
14/01/2011  9:49:55 [00092] I: Ip-3 PLink:d2 SLink:RD
14/01/2011  9:49:55 [00092] I: Ip-4 PLink:d2 Sink:ln
14/01/2011  9:49:55 [00092] I: Pv-5 PLink:d2 SLink:ln
14/01/2011  9:49:55 [00092] I: Pv-6 PLink:d2 SLink:ln
14/01/2011  9:49:55 [00092] I: Ip-9 PLink:d2 SLink:ln

	Tip
	Interesting chapters: Section 75.1, “System Log messages”.

System Log events can be simultaneously sent to the current Control Port session typing the following command.

[18:01:34] ABILIS_CPX:start l

Current Local Time: Friday 14/01/2011 09:53:07 (UTC+1.00)

Start System Log content real-time logging (Type CTRL+C + ENTER to stop):

14/01/2011  9:53:20 [00092] I: Pv-5 PLink:RD SLink:ln
14/01/2011  9:53:20 [00092] I: Pv-6 PLink:RD SLink:ln

The System Log content can be cleared using the command c l.

	Tip
	The command allows to display the log file of another version: [09:22:13] ABILIS_CPX:_d l ? D L [ver] [dd/mm/yyyy] [hh:mm:ss] Display System Log <ver> String corresponding to a version directory in <Optional> the form [x.y.z or x-y-z or y.z or y-z or y]. (E.g.: 5.3.1 or 6-1-0 or 2189). dd/mm/yyyy Selected date <Optional> hh:mm:ss Selected time <Optional>