CTI POTS ports (CTI Ports from 101 to 196) allow the connection between Abilis and analogue phone devices. Each one is identified with a two digits number (NUM parameter); the NUM value can be set by the user and must be unique (default values start from 01,02…).

[15:40:09] ABILIS_CPX:d p ctip:101

CTIP:101 DESCR:
Act     card:POTS-1<1>
Run     OPSTATE:UP        LOG:NO                               TYPE:USER
        signalling:POTS                 HOLD:YES     CT:ICT    SS:YES
        mode:Pots                                    NUM:01

[15:40:25] ABILIS_CPX:d p ctipe:101

CTIP:101 DESCR:
Act     card:POTS-1<1>
Run     OPSTATE:UP        LOG:NO                               TYPE:USER
        signalling:POTS                 HOLD:YES     CT:ICT    SS:YES
        mode:Pots                                    NUM:01
        LOOP:NO         TEST:NO
        CLIP:SYS        CLIP-STD:SYS      CLIP-TAS:SYS    MIN-FLASH:SYS
        SENSING:SYS     ABF:SYS  HPF:SYS  DEBOUNCE:SYS    MAX-FLASH:SYS
        COUNTRY:SYS                  IN-GAIN-ADJ:SYS      OUT-GAIN-ADJ:SYS
        AT:SYS          AT-CODE:SYS  AT-DURATION:SYS      BC:SYS
        DT:SYS          DT-CODE:SYS  DT-DURATION:SYS      OUT-DIAL-TONE:SYS
        SS-PICKUP:GROUP SS-PRES-CG:YES                    NP-CT:SYS
        SS-CF-DND:YES

Routings can be added using the POTS ports number (101-196) in POI or POO parameters.

The special value PBX can be used: CTI Router verifies the last two digits of the Called Input number and compares them with the field NUM of the CTI POTS ports. The call is routed to the correspondent port that matches.

Example: route the calls arriving from cluster Abilis2 to the analogue devices connected to the POTS, by verifying the last two digits of the called number (i.e. 02345678xx).

[15:40:31] ABILIS_CPX:a ctir pr:2 type:ctov sr:Abilis2 poo:pbx cdi:02345678??

COMMAND EXECUTED

[15:41:32] ABILIS_CPX:d ctir pr:2

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
Last change: 24/11/2010 15:41:32 CET

---+-----+-----------------+---------+--------------------+--------------------
PR |[DESCR]
   |TYPE |POI/SR   [SR]    |POO/DS   |CDI                 |CDO
ACT|NEXT       |LAST       |EEC |T301|CGI                 |CGO
EDT|SP   |SC   |DJ   |MJ   |FMDJ|FMMJ|SDI                 |SDO
   |SPOUT|SCOUT|DJOUT|MJOUT|LCS |LCST|SGI                 |SGO
   |                                 |RGI                 |RGO
   |FMRLY|FAXSP|MODSP|FMLVL|ECM |UDT |IG  |OG  |SG        |DL  |DH
   |CODERS
   |CODERSOUT
   |TI1 .. TI5
-------------------------------------------------------------------------------
2   CtoV  Abilis2           PBX       02345678??           *
-------------------------------------------------------------------------------

With this rule the calls to 0234567821 is routed to the ports with NUM:21.

By configuring the routing specifying the number of the CTI POTS ports, each call will be routed on the corresponding port without verifying the called number.

[14:45:35] ABILIS_CPX:a ctir pr:2 type:ctov sr:Abilis2 poo:101 cdi:*

COMMAND EXECUTED

[14:51:16] ABILIS_CPX:d ctir pr:2

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------

---+-----+-----------------+---------+--------------------+--------------------
PR |[DESCR]
   |TYPE |POI/SR   [SR]    |POO/DS   |CDI                 |CDO
ACT|NEXT       |LAST       |EEC |T301|CGI                 |CGO
EDT|SP   |SC   |DJ   |MJ   |FMDJ|FMMJ|SDI                 |SDO
   |SPOUT|SCOUT|DJOUT|MJOUT|LCS |LCST|SGI                 |SGO
   |                                 |RGI                 |RGO
   |FMRLY|FAXSP|MODSP|FMLVL|ECM |UDT |IG  |OG  |SG        |DL  |DH
   |CODERS
   |CODERSOUT
   |TI1 .. TI5
-------------------------------------------------------------------------------
2   CtoV  Abilis2           101       *                    *
-------------------------------------------------------------------------------

The routing above routes every call which comes from the cluster Abilis2 to CTIP:101.