44.2. TRFA Traps

Now it's possible to set threshold values and generate traps when a value goes above or returns below a threshold.

The ALARM resource can convert these traps in emails, SMS or other events.

44.2.1. TRFA IP Traps

The Trap generation is configurable for throughput and for traffic thresholds.

To configure a Trap, use the following command:

[15:50:24] ABILIS_CPX: a trfa ip trap act:yes res:ip-1 var:thr-out int:5min val:100

COMMAND EXECUTED 

To view all configured Traps, use the following command:

[15:55:49] ABILIS_CPX:d trfa ip trap                                      

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
---+----+----------------------------------------------------------------------
         [Res DESCR]
ID: ACT: RES:   VAR:        INT:        VAL:
---+----+----------------------------------------------------------------------
0   YES  [LAN]
         Ip-1   THR-OUT     5Min        100        (Kbit/sec)
---+----+----------------------------------------------------------------------
1   NO   [WAN]
         Ip-2   CHR-IN      Day         200        (Mbytes)
---+----+----------------------------------------------------------------------
[Caution]Caution

To activate the changes made, execute the initialization command init trfa ip trap. Remember to save the configuration (save conf).

[Tip]Tip

To display the statistics of the TRFA IP TRAP, refer to: Section 44.3.2, “TRFA statistics”

Meaning of the most important parameters:

ID

TRFA trap identifier [0..299].

ACT

Enabled/disabled entry [NO, YES].

RES

IP resource in the format "Ip-nnn", where 'nnn' can be [1..250]. By default any resource.

VAR

Monitored variable [THR-IN: Instant throughput in input; THR-OUT: Instant throughput in output; THR-TOT: Total instant throughput; CHR-IN: The number of received characters; CHR-OUT: The number of sent characters; CHR-TOT: The total numbers of received and sent characters]. By default any variable.

INT

Monitored interval:

  • For THR-IN, THR-OUT, THR-TOT: 5Min, 30Min, 2Hr.

  • For CHR-IN, CHR-OUT, CHR-TOT: Day, Week, Month.

VAL

Variable threshold value [0..4294967295].

  • For THR-IN, THR-OUT, THR-TOT variables the unit is Kbit/sec.

  • For CHR-IN, CHR-OUT, CHR-TOT variables the unit is Mbyte.

To delete a Trap, use the following command:

[15:55:54] ABILIS_CPX:c trfa ip trap id:0

COMMAND EXECUTED 

44.2.2. TRFA CTI Traps

The Trap generation is configurable for quantity of calls by types and for average time of calls.

To configure a Trap, use the following command:

[15:50:24] ABILIS_CPX:a trfa cti trap act:yes calls:service name:test int:5min var:abandoned val:3

COMMAND EXECUTED 

To view all configured Traps, use the following command:

[08:45:04] ABILIS_CPX:d trfa cti trap

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
---+----+---------+--------------------+-------+--------------+----------------
ID: ACT: CALLS:    NAME:                INT:    VAR:           VAL:
---+----+---------+--------------------+-------+--------------+----------------
0   YES  Service   test                 5Min    Abandoned      3          
1   YES  User-In   sip_phone            30Min   Duration       600        (sec)
---+----+---------+--------------------+-------+--------------+----------------
[Caution]Caution

To activate the changes made, execute the initialization command init trfa cti trap. Remember to save the configuration (save conf).

[Tip]Tip

To display the statistics of the TRFA CTI TRAP, refer to: Section 44.3.2, “TRFA statistics”

Meaning of the most important parameters:

ID

TRFA trap identifier [0..299].

ACT

Enabled/disabled entry [NO, YES].

CALLS

Calls category [Service: DISA service and sub-service; Number: Called number; User-In: User incoming; User-Out: User outgoing].

NAME

Service name or numbers set name or user name. Up to 40 characters. Spaces are not allowed. Case is preserved. If the name is empty the entry is ignored.

INT

Monitored interval:

  • For 'Service' and 'Number': Now, 5Min, 30Min, 2Hr, 1Day;

  • for 'User-In' and 'User-Out': 5Min, 30Min, 2Hr, 1Day.

VAR

Monitored variable. Allowed value depends on calls category and monitoring interval:

  • For 'Now': Waiting, Answered, Abandoned, TimePending;

  • For '5Min', '30Min', '2Hr', '1Day':

    • For 'Service': Answered, Abandoned, TimeToAnswer, Duration, TimeToAbandon;

    • For 'Number': Answered, Abandoned, Busy, Failed, TimeToAnswer Durartion, TimeToAbandon;

    • For 'User-In': Answered, Abandoned, Busy, Failed, Forwarded Seized, TimeToAnswer, Duration, TimeToAbandon;

    • For 'User-Out': Answered, Failed, TimeToAnswer, Duration.

VAL

Variable threshold value [0..4294967295]. Number of calls or seconds, depending on the variable.

To delete a Trap, use the following command:

[15:55:54] ABILIS_CPX:c trfa cti trap id:0

COMMAND EXECUTED