71.9. How to know which kind of hardware is mounted on Abilis

71.9.1. How to recognize PCI cards model

Enter into the Abilis control-program and type the command d pcidev to view a list of mounted PCI devices.

[10:10:10] ABILIS_CPX:d pcidev

PCI Server Overview:

ID Vendor          Device                    CardName         Slot/F   Ver Irq
-------------------------------------------------------------------------------
0  8086 INTEL      7190 BRIDGE HOST          -                   0/0  0.03   -
1  8086 INTEL      7191 BRIDGE PCI NORMAL    -                   1/0  0.03   -
2  8086 INTEL      7110 BRIDGE ISA           -                   7/0  0.02   -
3  8086 INTEL      7111 STORAGE IDE          -                   7/1  0.01   -
4  8086 INTEL      7112 USB HOST UHCI        -                   7/2  0.01   9
5  8086 INTEL      7113 BRIDGE OTHER         -                   7/3  0.02   -
6  1011 DEC        0019 NETWORK ETHERNET     ETH-FL100TX         8/0  4.01  10
7  10EC REALTEK    8139 NETWORK ETHERNET     ETH-RTL8139         9/0  1.00   5
8  10EC REALTEK    8139 NETWORK ETHERNET     ETH-RTL8139        10/0  1.00  12
9  1283 ITE        8872 SERIAL 16550         CTI-POTS           11/0  0.01   9
10 10B5 PLX TECHNO 9050 BRIDGE OTHER         CTI-HFC-OKI-4P     12/0  0.02  10

The following table shows the field Cardname and the corresponding model.

CardNameModel
CTI-HFC-SWIX-4PBBRI-HFC4
CTI-HFC-SWIX-8PBRI-HFC8
CTI-HFC-OKI-4PBRI-HFC4 with H100 bus(old model)
CTI-HFC-OKI-4PBRI-HFC8 with H100 bus(old model)
CTI-HFC-4PBRI-HFC4 without H100 bus(old model)
CTI-HFC-8PBRI-HFC8 without H100 bus(old model)
CTI-POTSPOTS card