11.1. POTSBOX device activation

If the POTSBOX is connected to the ELTI port to a non-expandable Abilis (MicroAbilis C3, PicoAbilis, etc.), then there isn't needed to activate it. The POTS ports will operate automatically after connecting the POTSBOX. Refer to the following chapter: Section 3.11, “POTSBOX connection”.

[Important]Important

The numbering of POTS Ports for POTSBOX will be immediately following after on-board POTS ports of Abilis.

Example: If you have BSE17 4-2-32 where the number of POTS on-board is 2 it result that the first port of POTSBOX is CTIP:103 for Abilis.

[15:30:26] ABILIS_CPX:d pcidev

PCI Server Overview:

ID Vendor          Device                    CardName         Slot/F   Ver Irq
-------------------------------------------------------------------------------
0  1106 VIA        3123 BRIDGE HOST                              0/0  0.00   -
1  1106 VIA        B091 BRIDGE PCI NORMAL                        1/0  0.00   -
2  3388 HINT CORP  0021 BRIDGE PCI NORMAL                        8/0  1.05   -
3  104C TEXAS INST AC56 BRIDGE CARDBUS                           9/0  0.00  15
4  1106 VIA        3038 USB HOST UHCI                           16/0  8.00  15
5  1106 VIA        3038 USB HOST UHCI                           16/1  8.00  11
6  1106 VIA        3038 USB HOST UHCI                           16/2  8.00  12
7  1106 VIA        3104 USB HOST EHCI                           16/3  8.02  10
8  1106 VIA        3177 BRIDGE ISA                              17/0  0.00   -
9  1106 VIA        0571 STORAGE IDE                             17/1  0.06 255
10 1106 VIA        3059 MULTIMEDIA AUDIO                        17/5  5.00  12
11 1106 VIA        3065 NETWORK ETHERNET     ETH-VT6102         18/0  7.04  15
12 1106 VIA        3122 DISPLAY VGA                             32/0  0.03  15
13 10EC REALTEK    8139 NETWORK ETHERNET     ETH-RTL8139        72/0  1.00  15
14 10EC REALTEK    8139 NETWORK ETHERNET     ETH-RTL8139        73/0  1.00  11
15 10B5 PLX TECHNO 9030 NETWORK OTHER        CTI-BSE17 4-2-32   74/0  2.00  12
16 1283 ITE        8872 NETWORK OTHER        MFPCIGT            75/0  0.01  10

If the POTSBOX is connected to the ELTI port on the POTSHUB of expandable Abilis (Base-N, Base-P, etc.) then there is needed to activate the POTSHUB and the POTSBOX.

Use the command a dev:potshub-x to add POTSHUB where x is the hardware device identifier[1..3].

[15:50:59] ABILIS_CPX:a dev:potshub-1

COMMAND EXECUTED 

[15:51:31] ABILIS_CPX:d dev

- Not Saved (SAVE CONF) -------------------------------------------------------

--------------- Active Watchdog and MFxx Resources (read only): ---------------
Device(s)   Run Physical Resource(s)                         SlotId  Addr  Irq
-------------------------------------------------------------------------------
MF          Yes Mf . . . . . . . . . . . . . . . . . . . . .      -  AC00   19
MFIO        No  MfIo . . . . . . . . . . . . . . . . . . . .      -  AC00   19

------------------ Active PCI Devices and Physical Resources: -----------------
Device(s)   Run Physical Resource(s) or CTI Port(s)          SlotId  Addr  Irq
--------------------------------------------------------------------------------
ASY-1       Yes Async-1  . . . . . . . . . . . . . . . . . .      -   3F8    4
ETH-1       Yes Eth-1  . . . . . . . . . . . . . . . . . . .     18   PCI (  5)
ETH-2       Yes Eth-2  . . . . . . . . . . . . . . . . . . .    100   PCI ( 11)
ETH-3       Yes Eth-3  . . . . . . . . . . . . . . . . . . .    101   PCI (  5)
POTSHUB-1   No   . . . . . . . . . . . . . . . . . . . . . .   NONE   PCI (  -)
 POTSBOX-1  No  101..132 . . . . . . . . . . . . . . . . . .      -   PCI (  -)

------------------ Active USB Devices and Physical Resources: -----------------
Device(s)   Run Con Physical Resource(s) or CTI Port(s)    USBPORTID
-------------------------------------------------------------------------------
DSLUSB-1    Yes Yes Dsl-1  . . . . . . . . . . . . . . . . 0.2


-------------- Inactive Watchdog and MFxx Resources (read only): --------------
Device(s)   Run Physical Resource(s)                         SlotId  Addr  Irq
-------------------------------------------------------------------------------
                     *** NO INACTIVE WATCHDOGs PRESENT ***                     

----------------- Inactive PCI Devices and Physical Resources: ----------------
Device(s)   Run Physical Resource(s) or CTI Port(s)          SlotId  Addr  Irq
-------------------------------------------------------------------------------
                     *** NO INACTIVE PCI CARDs PRESENT ***                     
               

----------------- Inactive USB Devices and Physical Resources: ----------------
Device(s)   Run Con Physical Resource(s) or CTI Port(s)    USBPORTID
-------------------------------------------------------------------------------
                    *** NO INACTIVE USB DEVICEs PRESENT ***            
[Important]Important

The max number of POTSHUB is 3.

Use the command a dev:potsbox-x to add POTSBOX where x is the hardware device identifier[1..12].

[15:59:26] ABILIS_CPX:a dev:potsbox-2

COMMAND EXECUTED 

[15:59:36] ABILIS_CPX:d dev

- Not Saved (SAVE CONF) -------------------------------------------------------

--------------- Active Watchdog and MFxx Resources (read only): ---------------
Device(s)   Run Physical Resource(s)                         SlotId  Addr  Irq
-------------------------------------------------------------------------------
MF          Yes Mf . . . . . . . . . . . . . . . . . . . . .      -  AC00   19
MFIO        No  MfIo . . . . . . . . . . . . . . . . . . . .      -  AC00   19

------------------ Active PCI Devices and Physical Resources: -----------------
Device(s)   Run Physical Resource(s) or CTI Port(s)          SlotId  Addr  Irq
-------------------------------------------------------------------------------
ASY-1       Yes Async-1  . . . . . . . . . . . . . . . . . .      -   3F8    4
ETH-1       Yes Eth-1  . . . . . . . . . . . . . . . . . . .     18   PCI (  5)
ETH-2       Yes Eth-2  . . . . . . . . . . . . . . . . . . .    100   PCI ( 11)
ETH-3       Yes Eth-3  . . . . . . . . . . . . . . . . . . .    101   PCI (  5)
POTSHUB-1   No   . . . . . . . . . . . . . . . . . . . . . .   NONE   PCI (  -)
 POTSBOX-1  No  101..132 . . . . . . . . . . . . . . . . . .      -   PCI (  -)
 POTSBOX-2  No  133..164 . . . . . . . . . . . . . . . . . .      -   PCI (  -)

------------------ Active USB Devices and Physical Resources: -----------------
Device(s)   Run Con Physical Resource(s) or CTI Port(s)    USBPORTID
-------------------------------------------------------------------------------
DSLUSB-1    Yes Yes Dsl-1  . . . . . . . . . . . . . . . . 0.2


-------------- Inactive Watchdog and MFxx Resources (read only): --------------
Device(s)   Run Physical Resource(s)                         SlotId  Addr  Irq
-------------------------------------------------------------------------------
                     *** NO INACTIVE WATCHDOGs PRESENT ***                     

----------------- Inactive PCI Devices and Physical Resources: ----------------
Device(s)   Run Physical Resource(s) or CTI Port(s)          SlotId  Addr  Irq
-------------------------------------------------------------------------------
                     *** NO INACTIVE PCI CARDs PRESENT ***                     
               

----------------- Inactive USB Devices and Physical Resources: ----------------
Device(s)   Run Con Physical Resource(s) or CTI Port(s)    USBPORTID
-------------------------------------------------------------------------------
                    *** NO INACTIVE USB DEVICEs PRESENT ***  
[Important]Important

The max number of POTSBOX is 12 (Up to 4 for each POTSHUB).

The number of physical ports assigned for one POTSBOX is 32, even if we will use a POTSBOX with fewer ports 4,8.12 or 24. The not installed ports will appear as "Not running" and may be deactivated and hidden using the S INACT CTIP:xxx command.