78.24. How to open a TELNET connection from Abilis

78.24. How to open a TELNET connection from Abilis
	Chapter 78. HowTo - Management

The TELNET server and client are activated by default.

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

*a r pr:1 in:telnet out:telnet cdi: udi:tln**	Transfer an incoming TELNET session to an outgoing TELNET session.
*a r pr:2 in: out:telnet cdi:* udi:tln**	Transfer any incoming session to an outgoing TELNET session.
save conf	Save the configuration.

To open a TELNET connection from “ABILIS_1” to “ABILIS_2”, type the following commands.

[16:13:17] ABILIS_1:   <- type Ctrl+P to access to the TELNET server prompt of “Abilis_1”.

[192.168.1.1] TELNETS>clr

CLR 00 00

[192.168.1.1] TELNETS>1-tln   <- to access to the TELNET client prompt of “Abilis_1”.
COM

[192.168.1.1] TELNETC>open 192.168.5.254    <- to open a connection to the remote host.
Trying 192.168.5.254 ... Open

User Access Verification

Password: *********
COM

Abilis CPX - Ver. 8.5.3/STD - Build 4238.29 - Branch 8.5 - Abilis-ID 1601526
Wednesday 15/11/2017 11:31:24 (UTC+1:00)
Login:super
Password:
Logged as SUPERUSER

[16:14:27] ABILIS_2:

Note

If you are connected to “ABILIS_1” through an ISDN call, if you type the combination Ctrl+P, the TELNET server prompt of the Abilis that generates the call will be shown.

To access to the TELNET client of “ABILIS_1”, you have to type the 22n-tln command, where n refers to the X25-n port that you have used for the connection. For example:

[10:39:17] ABILIS_1:   <- type Ctrl+P to access to the TELNET server prompt of the Abilis that generates the call.

[192.168.1.1] TELNETS>clr

CLR 00 00

[192.168.1.1] TELNETS>221-tln   <- to access to the TELNET client prompt of “Abilis_1”. 
COM

[192.168.2.1] TELNETC>open 192.168.5.254   <- to open a connection to the remote host.
Trying 192.168.5.254 ... Open

User Access Verification

Password: *********
COM

Abilis CPX - Ver. 8.5.3/STD - Build 4238.29 - Branch 8.5 - Abilis-ID 1601526
Wednesday 15/11/2017 11:31:24 (UTC+1:00)
Login:super
Password:
Logged as SUPERUSER

[10:40:59] ABILIS_2:

78.24.1. How to change default IP address of Ethernet modem by telnet

This is useful when you have multiple Ethernet modems connected to the same Abilis.

	Note
	The default IP address is 192.168.168.168/28.

	Note
	The default user is admin and password is VuDi218.

Open a TELNET connection from Abilis to Ethernet modem, typing the following commands:

[16:13:17] ABILIS_1:   <- type Ctrl+P to access to the TELNET server prompt of ABILIS.

[192.168.1.1] TELNETS>clr

CLR 00 00

[192.168.1.1] TELNETS>1-tln   <- to access to the TELNET client prompt of ABILIS.
COM

[192.168.1.1] TELNETC>open 192.168.168.168    <- to open a connection to the Ethernet modem.
Trying 192.168.168.168 ... Open
^ABCM963381 Broadband Router
Login: admin
Password:  
 >

Change the default IP address of Ethernet modem with new IP 192.168.168.169/28:
```
> lan config --ipaddr primary 192.168.168.169 255.255.255.240
> 
```
Caution
The change will start immediately, which will lead to the disconnection of the telnet session to the modem.

	Caution
The change will start immediately, which will lead to the disconnection of the telnet session to the modem.

Reconnect to new IP address of Ethernet modem and save the configuration:

[192.168.1.1] TELNETC>open 192.168.168.169    <- to open a connection to the Ethernet modem.
Trying 192.168.168.169 ... Open
^ABCM963381 Broadband Router
Login: admin
Password:  
 > save
config saved.
 >

	Important
	If you do not save the configuration after reboot, the modem will lose the modification you made.

	Tip
Interesting chapters: Section 2.13.1, “Ethernet modem”; Section 14.3, “How to check ADSL/VDSL line parameters of Ethernet modem”; Section 79.8, “How to configure ADSL/VDSL connections using Ethernet modems”.

Tip

Interesting chapters:

Section 2.13.1, “Ethernet modem”;

Section 14.3, “How to check ADSL/VDSL line parameters of Ethernet modem”;

Section 79.8, “How to configure ADSL/VDSL connections using Ethernet modems”.


78.23. How to activate the Abilis SSH server		78.25. How to open a SSH connection from Abilis