51.2. TRFA Traps

Now it's possible to set threshold values and generate traps when a value goes above or returns below a threshold.

The ALARM resource can convert these traps in emails, SMS or other events.

51.2.1. TRFA IP Traps

The Trap generation is configurable for throughput and for traffic thresholds.

To configure a Trap, use the following command:

[15:50:24] ABILIS_CPX: a trfa ip trap act:yes res:ip-1 var:thr-out int:5min val:100

COMMAND EXECUTED 

To view all configured Traps, use the following command:

[15:55:49] ABILIS_CPX:d trfa ip trap                                      

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
---+----+----------------------------------------------------------------------
         [Res DESCR]
ID: ACT: RES:   VAR:        INT:        VAL:
---+----+----------------------------------------------------------------------
0   YES  [LAN]
         Ip-1   THR-OUT     5Min        100        (Kbit/sec)
---+----+----------------------------------------------------------------------
1   NO   [WAN]
         Ip-2   CHR-IN      Day         200        (Mbytes)
---+----+----------------------------------------------------------------------
[Caution]Caution

To activate the changes made, execute the initialization command init trfa ip trap. Remember to save the configuration (save conf).

[Tip]Tip

To display the statistics of the TRFA IP TRAP, refer to: Section 51.3.2, “TRFA statistics”

Meaning of the most important parameters:

ID

TRFA trap identifier [0..299].

ACT

Enabled/disabled entry [NO, YES].

RES

IP resource in the format "Ip-nnn", where 'nnn' can be [1..250]. By default any resource.

VAR

Monitored variable [THR-IN: Instant throughput in input; THR-OUT: Instant throughput in output; THR-TOT: Total instant throughput; CHR-IN: The number of received characters; CHR-OUT: The number of sent characters; CHR-TOT: The total numbers of received and sent characters]. By default any variable.

INT

Monitored interval:

  • For THR-IN, THR-OUT, THR-TOT: 5Min, 30Min, 2Hr.

  • For CHR-IN, CHR-OUT, CHR-TOT: Day, Week, Month.

VAL

Variable threshold value [0..4294967295].

  • For THR-IN, THR-OUT, THR-TOT variables the unit is Kbit/sec.

  • For CHR-IN, CHR-OUT, CHR-TOT variables the unit is Mbyte.

To delete a Trap, use the following command:

[15:55:54] ABILIS_CPX:c trfa ip trap id:0

COMMAND EXECUTED 

51.2.2. TRFA CTI Traps

The Trap generation is configurable for quantity of calls by types and for average time of calls.

To configure a Trap, use the following command:

[15:50:24] ABILIS_CPX:a trfa cti trap act:yes calls:service name:test int:5min var:abandoned val:3

COMMAND EXECUTED 

To view all configured Traps, use the following command:

[08:45:04] ABILIS_CPX:d trfa cti trap

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
---+----+---------+--------------------+-------+--------------+----------------
ID: ACT: CALLS:    NAME:                INT:    VAR:           VAL:
---+----+---------+--------------------+-------+--------------+----------------
0   YES  Service   test                 5Min    Abandoned      3          
1   YES  User-In   sip_phone            30Min   Duration       600        (sec)
---+----+---------+--------------------+-------+--------------+----------------
[Caution]Caution

To activate the changes made, execute the initialization command init trfa cti trap. Remember to save the configuration (save conf).

[Tip]Tip

To display the statistics of the TRFA CTI TRAP, refer to: Section 51.3.2, “TRFA statistics”

Meaning of the most important parameters:

ID

TRFA trap identifier [0..299].

ACT

Enabled/disabled entry [NO, YES].

CALLS

Calls category [Service: DISA service and sub-service; Number: Called number; User-In: User incoming; User-Out: User outgoing].

NAME

Service name or numbers set name or user name. Max 40 characters. Space not allowed. If the name is empty the entry is ignored.

INT

Monitored interval:

  • For 'Service' and 'Number': Now, 5Min, 30Min, 2Hr, 1Day;

  • for 'User-In' and 'User-Out': 5Min, 30Min, 2Hr, 1Day.

VAR

Monitored variable. Allowed value depends on calls category and monitoring interval:

  • For 'Now': Waiting, Answered, Abandoned, TimePending;

  • For '5Min', '30Min', '2Hr', '1Day':

    • For 'Service': Answered, Abandoned, TimeToAnswer, Duration, TimeToAbandon;

    • For 'Number': Answered, Abandoned, Busy, Failed, TimeToAnswer Durartion, TimeToAbandon;

    • For 'User-In': Answered, Abandoned, Busy, Failed, Forwarded Seized, TimeToAnswer, Duration, TimeToAbandon;

    • For 'User-Out': Answered, Failed, TimeToAnswer, Duration.

VAL

Variable threshold value [0..4294967295]. Number of calls or seconds, depending on the variable.

To delete a Trap, use the following command:

[15:55:54] ABILIS_CPX:c trfa cti trap id:0

COMMAND EXECUTED