6.1. Introduction

The introduction of licencing has been done by taking into consideration the products already purchased by our customer so that they can upgrade their products with the latest release without loosing any functionality present up to release 6.5.x.

[Note]Note

This is only partially valid for Mini-Abilis equipped with FPanel watchdog that does not provide the ABILIS-ID, where some functionalities will not be available after the upgrade to 7.0.

6.1.1. ABILIS ID and the class of product

Each Abilis CPX has unique identifier which is visible on the serial number label.

It's easy to retrieve this identifier from a remote Abilis using the commands d i or d g. The identifier is named ABILIS-ID.

[16:02:36] ABILIS_CPX:d i

      Abilis CPX - Ver. 7.0.0/STD - 24/09/2010 - Build 3357.0 - 24/09/2010
                            (c) 1994/2010 - Abilis

ABILIS-ID: 2001

Free/Total Memory: 87,281,744/268,304,384  Largest Block: 87,266,672
Free/Used/Total HD/CF space (in KB): 66,474/55,876/122,350
...


[16:04:14] ABILIS_CPX:d g

...
ABILIS-ID: 2001                                                     <Read Only>

The ABILIS-ID parameter is used to know the class of the product, which is used to select which features are available out-of-the-box.

Other features may be added purchasing additional licences and installing them using the steps in the chapter Section 6.1.2, “Managing licences”.

The identification of the class is easy:

Table 6.1. Abilis ID and class of products

Number of digits of ABILIS IDClass of product
5 or less than 50 (legacy production)
6identified by the first, leftmost, number

Examples:

  • ABILIS-ID: 2001 or ABILIS-ID: 50002 are of class 0

  • ABILIS-ID: 300049 has class 3, ABILIS-ID: 100031 has class 1

[Note]Note

If there's no ABILIS-ID, it means that Abilis is not equipped with MFIDE device and so it belongs to FP class.

Below there is a table showing the Abilis CPX product classes.

Table 6.2. Class of products

ClassProduct
FPFormer Mini-Abilis with FPANEL
0Former Abilis Base-x with MFIDE2/MFIDE3
1New Micro-Abilis (with BRI4-POTS4 board and MFLPC)
2New Nano-Abilis (with MiniBRI1 board and MFLPC)
3New Abilis Base-J with MFIDE3
4New Mini-Abilis with MFIDE3
5New Compact-Abilis (with ETH3-BRI4-POTS8 and MFPCI)
6New Abilis Base-K with MFIDE3

Here's a table showing Classes and licenced features.

Table 6.3. Licenced features

FeatureDescriptionClass FPClass 0Class 1Class 2Class 3Class 4Class 5Class 6ExtendedVMX
DATACOMPData compression service          
VMXVMX system         YES
IPLBIP Load Balancing service YES     YESYESYES
MULTILINKResources over Multi-Links YES     YESYESYES
LCSLast Calling number service YES     YESYESYES
SOFTPBXSoft-PBX service (OPC, Address Book, Click&Call, ...) YES     YESYESYES
GPSGPS resources YES     YES  
ACNTAccounting service YES     YESYESYES
TRFATraffic AnalyzerYESYES     YESYESYES
OSPFOpen Shortest Path First protocol YES     YES  
FTPSRVFTP serverYESYESYESYESYESYESYESYESYESYES
SMTPSMTP resourceYESYES     YESYESYES
POP3POP3 resourceYESYES     YESYESYES
RADIUSRADIUS resource YES     YESYESYES
VRRPVRRP resource YES     YES  
POEACPPP Over Ethernet Access Concentrator YES     YESYESYES
ARCHIVEArchive resource YES     YESYESYES
CTIDISACTI DISA serviceYESYES     YESYESYES
CTIIAXCTI IAX serviceYESYESYESYESYESYESYESYESYESYES
CTISIPCTI SIP serviceYESYESYESYESYESYESYESYESYESYES
CTISMSCTI SMS service YES     YESYESYES
AIPTNumber of AIPT (Abilis tunnel) resources [0, 1..250]4250224242503232
IKEHOSTSNumber of IKE hosts [0, 1..128] (IPSEC/IKE resources)21281121112844

6.1.2. Managing licences

A licence is a text file whose name contains the ABILIS ID (e.g. LIC1-0000002001.TXT). It can be also a mail with the text of the licence file.

There are three way to install a license:

  • Upload the text file in the directory C:\LICENCE of the Abilis CPX compact flash using FTP (please refer to FTP protocol)

  • Upload the text file in the directory C:\LICENCE of the Abilis CPX compact flash using the command licence put for XMODEM or the command licence put z for ZMODEM (please refer to chapter put command)

  • Copy and paste the licence text using the command licence set

[19:49:27] ABILIS_CPX:licence SET

Please enter the licence data and terminate with CTRL+Z + ENTER
(type CTRL+C + ENTER to abort):

Tcvk+otc1AmdPyqOXloJj0oZ3LXR/dkJrv1rQl0YyA6lG6by5rvyqdOYTxDoi1i8
ul2pW0BE9sOG1ansjjDAqInA0AoNZ19FgkzJAAi5StsLOsYze/OJZ13Bh+J9Zj/9
M/lCIepQJY4jvcALWddkVlY1O0I4xfCzOdNyTnODhsVl9wpl5fibZvaLnG+c5Jnt
prsOHu+xhfnnoBXyTjkt0SHvg0druqg39SVzKtOxd4YGSO646NfhgXrYLcjVPgPl
eRFmluzTTZtUQpQGYFmh5QWel6cyvVj9Ka5MxrSoStiOdeAnte71D8N6CluJxPYY
iS1KHVzl4zGfp2ADXE778Q==


RECEIVED LICENCE CHECK AND SAVING IN PROGRESS... CHECK PASSED
RECEIVED LICENCE SAVED

[19:49:48] ABILIS_CPX:

Managing licences is easy trough the Abilis CP using the following commands:

[19:49:48] ABILIS_CPX:licence ?

COMPARE        Compare ACTIVE licence and STORED licence
DISPLAY        Display licences or permissions
GET            Download ACTIVE licence or STORED licence file
PUT            Upload STORED licence file
SET            Enter STORED licence value

[19:54:04] ABILIS_CPX:licence compare ?

LICENCE COMPARE                      Compare ACTIVE and STORED licences

[19:54:11] ABILIS_CPX:licence display ?

LICENCE DISPLAY                      Display ACTIVE licence and compare it
                                     with the STORED licence
LICENCE DISPLAY ACTIVE               Display ACTIVE licence
LICENCE DISPLAY FILE                 Display STORED licence
LICENCE DISPLAY PERMISSIONS          Display ACTIVE permissions and compare
                                     them with the STORED ones
LICENCE DISPLAY PERMISSIONS ACTIVE   Display ACTIVE permissions
LICENCE DISPLAY PERMISSIONS CLASS    Display permissions pertaining to Abilis
                                     Class Id.
LICENCE DISPLAY PERMISSIONS FILE     Display STORED permissions

[19:54:22] ABILIS_CPX:licence get ?

ACTIVE         Download ACTIVE licence
FILE           Download STORED licence file

[19:54:35] ABILIS_CPX:licence set ?

LICENCE SET                          Receive licence file from the keyboard

You can display the enabled features by the current licence using the command:

[19:55:12] ABILIS_CPX:licence display permissions

ACTIVE PERMISSIONS:

-----------|-----------|-------------------------------------------------------
Name       |Value      |Description
-----------|-----------|-------------------------------------------------------
ABILISID   |2001       |Abilis CPX serial number
EXPIRY     |NONE       |Licence expiration date YYYY-MM-DD
DATACOMP   |YES        |Data compression service
IPLB       |YES        |IP Load Balancing service
LCS        |YES        |Last Calling number service
MULTILINK  |YES        |Resources over Multi-Links
SOFTPBX    |YES        |Soft-PBX service (OPC, Address Book, Click&Call, ...)
VMX        |YES        |VMX system
GPS        |YES        |GPS resources
ACNT       |YES        |Accounting service
TRFA       |YES        |Traffic Analyzer
OSPF       |YES        |Open Shortest Path First protocol
FTPSRV     |YES        |FTP server
SMTP       |YES        |SMTP resource
POP3       |YES        |POP3 resource
RADIUS     |YES        |RADIUS resource
VRRP       |YES        |VRRP resource
POEAC      |YES        |PPP Over Ethernet Access Concentrator
ARCHIVE    |YES        |Archive resource
CTIDISA    |YES        |CTI DISA service
CTIIAX     |YES        |CTI IAX service
CTISIP     |YES        |CTI SIP service
CTISMS     |YES        |CTI SMS service
AIPT       |250        |Number of AIPT (Abilis tunnel) resources [0, 1..250]
IKEHOSTS   |128        |Number of IKE hosts [0, 1..128] (IPSEC/IKE resources)

LICENCE STORED IN FILE EQUALS THE ACTIVE ONE