| 46.6. CTI Router | ||
|---|---|---|
 | Chapter 46. CTI System |  |
| 46.6. CTI Router | ||
|---|---|---|
| | Chapter 46. CTI System | |
The CTI Router is a smart telephone exchange. As a simplified description we may say that CTI Router processes an incoming call in following steps: it receives the call request, it finds an appropriate routing, it performs the outgoing call.
To manage the CTI Router the following commands are used:
The d ctir ? command shows all available parameters.
The following table explains the meaning of those special values.
Table 46.2. Special characters and values available in CTI routing table
| Value | Description | Examples |
|---|---|---|
* | Can be used to replace a sequence of digits or a part of it (at the beginning or the end of a sequence). | CDI:*, CDI:2345*, CDI:*456 |
* | Identifies all CTIP ports ISDN, POTS, VPOTS, CELL. | POI:* |
* | Identifies all clusters. | SR:* |
** | Identify all CTIP ports, including special ones. The whole set is ISDN, POTS, VPOTS, CELL, Iax, Sip, Disa, Vo, Vm, Vr, Mix, Sl. | POI:** |
? | In a sequence of numbers, it can be used to mean “any digit”. | CDI:4??, CDI:???234, CDI:34??67, CDI:123? |
# | Means “NONE”. | CGO:# |
## | Forces disallow. | CGO:## |
#! | Forces allow. | CGO:#! |
n, nn,
nnn | Identify CTI ports ISDN, POTS, VPOTS, CELL. | OUT:31 |
Gn, Gnn | Identify CTI groups. | GI:G1 |
G* | Identifies "all groups". | GI:G* |
G0 | Includes the resources Disa, Sip, Iax, Vo. Read only. | GI:G0 |
PBX | CTI POTS Port group. | OUT:PBX |
Iax | IAX connection. | OUT:Iax |
Sip | SIP connection. | OUT:Sip |
Disa | DISA connection. | OUT:Disa |
Vo | Virtual Office connection. | OUT:Vo |
Vm | Voice Mail connection. | OUT:Vm |
Vr | Voice Recorder connection. | OUT:Vr |
Mix | Voice Mixer connection. | OUT:Mix |
SL | DATA connection. | OUT:SL |
'list' | Specification of an element list, type IN (list of ISDN numbers) or RU (Rule), or MR (Master Rule). | CDI:'node', CDI:'ToAbilis2' |
'list' | Identifies a list of clusters (list type EC). | SR:'clusterlist' |
'macro' | Macro functions. | CDO:'CDI.S2' |
<AUTO-I> ,
<AUTO-O> | Special value of OUT field. | OUT:<AUTO-I> , OUT:<AUTO-O> |
![[Tip]](../images/tip.png) | Tip |
|---|---|
The characters |
It shows the CTI routing table in a short format. If priority is omitted, the command shows all routings.
[12:06:58] ABILIS_CPX:d ctir
Last change: 16/06/2015 09:13:29 CET
---+------+-----------------+---------+--------------------+--------------------
PR |[DESCR]
|BCI |POI |SR |GI |OUT |CDI |CDO
ACT|NEXT |LAST |EEC |T301|CGI |CGO
EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO
|SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO
| |BCO |RGI |RGO
|FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH
|CODERS
|CODERSOUT
|TI1 .. TI5
--------------------------------------------------------------------------------
0 DATA * # # Sl * *
--------------------------------------------------------------------------------
1 TR PBX # # PBX 1? *
--------------------------------------------------------------------------------
2 VOICE # Abilis2 # 101 * *
NO ANY NO Dft * *
6400 Sys * * Sys Sys * *
--------------------------------------------------------------------------------Below the meaning of the most important parameters:
BCIBearer capability input [TR,
DATA, VOICE,
Speech, 3.1kHz,
UDI, RDI,
UDI-TA, Video]. The values
Speech, UDI, RDI, 3.1Khz, UDI-TA, Video are the regular ITU
values, while TR, DATA, VOICE are shortcuts for
combinations:
Speech: The bearer capability BC
speech is used for an ordinary voice call and the network may
route the call over analogue circuits and may use voice
compression, echo cancellation and echo suppression for
instance.
3.1kHz: The bearer capability BC
3.1kHz Audio is used for voice grade information, i.e. non
voice calls, but where the information is coded as analogue
signals within the 300 Hz to 3.1 kHz frequency band. This is
typically used for modems, e.g. ordinary data or
telefax.
UDI: The bearer capability 64 kbit
Unrestricted Digital Information (UDI.) is used for calls
where the information is digitally coded, i.e. data of some
description. This type of connection is often referred to as
Clear Channel. It can for instance be a Video application or a
Group four fax.
RDI: The bearer capability 64 kbit
Restricted Digital Information (RDI) is digitally coded
information at 56 kbit/s. The reason for this bearer
capability is some American 1.5 Mbit CAS networks. This BC is
used in the same way as the BC 64 kbit Unrestricted. Some
networks charge less for this type of call than for a full 64
bit unrestricted. This BC is only supported in US ISDN
protocols, thus making international calls with the bearer
capability impossible.
TR = any value.
DATA = UDI, RDI.
VOICE = Speech, 3.1kHz.
![[Warning]](../images/warning.png) | Warning |
|---|---|
Please do not confuse
|
POIInput port/group [#, *, **, G*, G0..G32, PBX, 1..600, Sl, Iax, Sip, Disa, Vo], where:
* = Any CTI port
ISDN/POTS/VPOTS/CELL;
** = Any CTI port, including Iax,
Sip, Disa, Vo.
SRInput cluster/group [#, *, G*, G0..G32, cluster name or EC/RU/MR list name between single quote]. The cluster name must correspond to an existing CTI cluster. The list name must correspond to an existing EC/RU/MR list.
GIInput group [#, G*, G0..G32].
OUTOutput group/port/cluster [#, G0..G32, PBX, 1..600, Sl, Iax, Sip Disa, Vo, Vm, Mix, Sl, <AUTO-I>, <AUTO-O>. The cluster name must correspond to an existing CTI cluster.
<AUTO-I> : by specifying this value in DS, the routing will be matched according to the standard rules. The destination cluster will be chosen by comparing the field CDI with the NUMs set in each cluster. When the match is found, the correspondent cluster will be the real destination of the call.
<AUTO-O> : by specifying this value in DS, the routing will be matched according to the standard rules. The destination cluster will be chosen by comparing the field CDO with the NUMs set in each cluster. When the match is found, the correspondent cluster will be the real destination of the call.
CDIInput called address [0..9, *, #, ?, 'list'], optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes, or [##, $]. (E.g.: 123, 123*, 12?, 12?*, *, #, ##, $, 'listname', 123'listname') See HELP ISDN ATTRIBUTES for details on attributes. See HELP SPECIAL VALUES for details on meaning of special values.
CDOOutput called address [0..9, *, #, 'macro'], optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes. (E.g.: 123, *, #, 123'cdi', 'cdi'123'cgi.s5', 'sdi', ''listname'', ''listname.cd'', ''listname.cg'.s2', ''listname'.s5') See HELP ISDN ATTRIBUTES for details on attributes. See HELP ISDN VALUES for details on meaning of special values.
CGIInput calling address [0..9, *, #, ?, 'list'], optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] and/or PI [a, r, m, q] and/or SI [y, v, w, z, j] attributes, or [##, $]. (E.g.: 123, 123*, 12?, 12?*, *, #, ##, $, 'listname', 123'listname') See HELP ISDN ATTRIBUTES for details on attributes. See HELP ISDN VALUES for details on meaning of special values.
CGOOutput calling address [0..9, *, #, 'macro'], optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] and/or PI [a, r, m, q] and/or SI [y, v, w, z] attributes. (E.g.: 123, *, #, 123'cdi', 'cdi'123'cgi.s5', 'sdi', ''listname'', ''listname.cd'', ''listname.cg'.s2', ''listname'.s5', 12''listname''34) See HELP ISDN ATTRIBUTES for details on attributes. See HELP ISDN VALUES for details on meaning of special values.
![[Note]](../images/note.png)
SDIInput called sub-address [AlphaNumExt, *, ?, #, ##, $, 'list']. (E.g.: ho11, me1*, ho??12?, ho?12?*, *, #, 'listname', AA'listname') See HELP ISDN VALUES for details on meaning of special values.
SDOOutput called sub-address [AlphaNumExt, *, #, 'macro']. (E.g.: home123, *, #, home123'sgi', 'sgi'home123'cdi.s5', 'sdi' ''listname.cd'', ''listname.cg'.s2', ''listname'.s5', AAA''listname.cd'', AAA'sdi'BBB''listname'.s5') See HELP ISDN VALUES for details on meaning of special values.
SGIInput calling sub-address [AlphaNumExt, *, ?, #, ##, $, 'list']. (E.g.: ho11, me1*, ho??12?, ho?12?*, *, #, 'listname', AA'listname') See HELP ISDN VALUES for details on meaning of special values.
SGOOutput calling sub-address [AlphaNumExt, *, #, 'macro']. (E.g.: home123, *, #, home123'sgi', 'sgi'home123'cdi.s5', 'sdi' ''listname.cd'', ''listname.cg'.s2', ''listname'.s5', AAA''listname.cd'', AAA'sgi'BBB''listname'.s5') See HELP ISDN VALUES for details on meaning of special values.
RGIInput redirecting address [0..9, *, #, ?, 'list'], optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] and/or PI [a, r, m, q] and/or SI [y, v, w, z, j] attributes, or [##, $]. (E.g.: 123, 123*, 12?, 12?*, *, #, ##, $, 'listname', 123'listname') See HELP ISDN ATTRIBUTES for details on attributes. See HELP ISDN VALUES for details on meaning of special values.
RGOOutput redirecting address [0..9, *, #, 'macro'], optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] and/or PI [a, r, m, q] and/or SI [y, v, w, z] attributes. (E.g.: 123, *, #, 123'cdi', 'cdi'123'cgi.s5', 'sdi', ''listname'', ''listname.cd'', ''listname.cg'.s2', ''listname'.s5', 12''listname''34) See HELP ISDN ATTRIBUTES for details on attributes. See HELP ISDN VALUES for details on meaning of special values.
BCOBearer capability output [*, Speech, 3.1Khz,
UDI: Unrestricted Digital Information, RDI:
Restricted Digital Information, UDI-TA:Unrestricted Digital
Information with Tones/Announcement, Video].
NEXTAlternative routing selection [N (or NO), U (or UNLIMITED), L (or LIMITED), T (or TRANSFERT), BB (or BUTBUSY)] or the name of ICAUSE/RU/MR list between single quotes (E.g.: T or BUTBUSY or 'my_causes').The admitted values are the following:
N (or No): in the event of
failure of the routing, no procedure for seeking an
alternative routing is put into effect.
L (or Limited): next routing is
evaluated only for internal causes, i.e. those with
location=0xFF (i.e. network out of service, all channels
engaged, etc…).
U (or Unlimited): next routing is
evaluated for every cause except: 0x91 (user busy) or 0x93 (no
user responding, user alerted).
T (or Transfer): next routing is
always evaluated.
BB (or ButBusy): next routing is
evaluated for any reason except BUSY.
'my_causes' the name of
ICAUSE/RU/MR list.
T301Alerting time-out [Dft, 5..180 sec.].When the time-out expires, administrator may choose to end the call or carry out a search for an alternative routing by configuring the NEXT parameter. [Dft (default): this time-out corresponds to the time-out defined by the Provider of the ISDN line or by the devices (i.e. PABX) connected to the Abilis].
LCSEnable/disable Last Calling number Service [NO, YES].
LCSTLast Calling number Service records timeout [Sys, NONE, 1..999 hour].
TI1:..TI5Time interval in the format "day,hh:mm-hh:mm", where 'day' can be:
a single day of the week [MO, TU, WE, TH, FR, SA, SU];
a set of days of the week (E.g.: MO+TH or TU+TH+SU);
a range of days of the week (E.g.: MO-WE or TH-SU);
a date in the format "dd/mm/yy", where
'dd' can be [*, 1..31];
'mm' can be [*, 1..12];
'yy' can be [*, 0..99].
(e.g. 23/12/13 or 31/12/* or 1/*/* or */8/* or 1/04/*)
begin and end date separated by '-', i.e. "d1/m1/y1-d2/m2/y2", where
d1' and 'd2' can be [*, 1..31];
'm1' and 'm2' can be [*, 1..12];
'y1' and 'y2' can be [*, 0..99].
(e.g. 23/12/13-07/01/14 or 23/12/*-07/01/* or 01/*/*-5/*/*)
"ALL".
Default values are TI1:ALL,00:00-23:59 and TI2...TI5:#: routing is valid on all days of the week (ALL) throughout the day (from 00.00 to 23.59). The value # on other TI means that the time intervals are disabled.
By specifying a priority value, the command shows the routing identified by specified priority:
[12:07:00] ABILIS_CPX:d ctir pr:2
Last change: 16/06/2015 12:23:13 CET
---+------+-----------------+---------+--------------------+--------------------
PR |[DESCR]
|BCI |POI |SR |GI |OUT |CDI |CDO
ACT|NEXT |LAST |EEC |T301|CGI |CGO
EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO
|SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO
| |BCO |RGI |RGO
|FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH
|CODERS
|CODERSOUT
|TI1 .. TI5
--------------------------------------------------------------------------------
2 VOICE PBX # # Abilis2 'ToAbilis2' *
--------------------------------------------------------------------------------
The routings are scanned in sequence starting from the lowest priority. When a call arrives, all its parameters are compared with the rules of the table. The one which satisfies all the parameters will be matched; otherwise, the CTI Router will go on with the scan.
The command d ctire shows an extended view of the CTI routings:
[12:07:19] ABILIS_CPX:d ctire pr:2
Last change: 16/06/2015 12:23:13 CET
-------------------------------------------------------------------------------
PR:2 DESCR:
ACT:YES EDT:NO BCI:VOICE BCO:* EEC:NO
NEXT:NO POI:PBX SR:# GI:# OUT:Abilis2
LAST:ANY CDI:'ToAbilis2' CDO:*
T301:Dft CGI:* CGO:*
UDT:NO SDI:* SDO:*
LCS:NO SGI:* SGO:*
LCST:Sys RGI:* RGO:*
IG:Sys OG:Sys SG:Sys DL:Sys DH:Sys
FMRLY:Sys FAXSP:AUTO MODSP:AUTO FMLVL:Sys FMDJ:Sys FMMJ:Sys
SP:6400 SC:Sys DJ:Sys MJ:Sys ECM:SYS
CODERS:Sys
SPOUT:* SCOUT:* DJOUT:* MJOUT:*
CODERSOUT:*
TI1:ALL,00:00-23:59 TI2:# TI3:# TI4:# TI5:# The meaning of the routing: if a call comes from any POTS or VPOTS
(POI:PBX), the called number
belongs to the list
ToAbilis2
(CDI:'ToAbilis2'), routes it to
the cluster Abilis2.
Viewing CTIR rules in a reduced format can be done using:
[11:19:20] ABILIS_CPX:d ctirr pr:1
Last change: 16/06/2015 12:23:13 CET
---+------+-----------------+---------+--------------------+--------------------
PR |[DESCR]
|BCI |POI |SR |GI |OUT |CDI |CDO
ACT|NEXT |LAST |EEC |T301|CGI |CGO
EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO
|SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO
| |BCO |RGI |RGO
|FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH
|CODERS
|CODERSOUT
|TI1 .. TI5
--------------------------------------------------------------------------------
21 VOICE Sip # # PBX 5?? *
NO ANY NO Dft * *
64000 Sys Sys Sys Sys Sys * *
* * * * NO Sys * *
* * *
Sys AUTO AUTO Sys SYS NO Sys Sys Sys Sys Sys
Sys
G.711
--------------------------------------------------------------------------------The meaning of the routing: if call comes from CTISIP resource and the called number is made of three digits, starting with 5, the call is routed toward the special group PBX. The parameter SP is set to 64000 and the parameter CODERS is set to G.711, so only SIP call using this codec will be accepted.
Using filters may help to search the desired rule/rules.
[15:52:50] ABILIS_CPX:_d ctire ?
D CTIR[E|R] Display all CTI Routings
D CTIR[E|R] filter:val [filter:val] Display any CTI Routing matching the
specified filter(s)
Allowed filters:
PR: CTI routing priority. <Optional>
One value in the range [0..255] or a range of values 'xx-yy'
or a list of values 'xx,yy,...' separated by ',' (comma) or
"A" or "ALL".
DESCR: Scan the description for the occurrence of the given <Optional>
substring. Case-insensitive match.
From 0 up to 70 Alphanumeric extended characters.
Spaces are allowed. Strings holding spaces must be written
between quotation marks (E.g. "str1 str2").
BCI: Bearer capability input [TR, DATA, VOICE, Speech, UDI, <Optional>
RDI, 3.1Khz, UDI-TA, Video]
POI: | Input port/group [#, *, **, G*, G0..G32, PBX, <Optional>
| 1..600, Iax, Sip, Disa, Vo, Sl]
SR: | Input cluster/group [#, *, G*, G0..G32, cluster name <Optional>
| or EC/RU/MR list name between single quote], or a string
| preceded and/or followed by '*' (E.g.: "*mystr" or
| "mystr*" or "*mystr*") or "*".
GI: | Input group [#, G*, G0..G32] <Optional>
| These filters are alternatives to IN.
IN: Input group/port/cluster. <Optional>
This filter is alternative to POI, SR, GI.
See POI, SR, GI for the range.
OUT: Output group/port/cluster [#, G0..G32, PBX, 1..600, <Optional>
Iax, Sip, Disa, Vo, Vm, Mix, Sl, <AUTO-I>, <AUTO-O>,
or a string preceded and/or followed by '*' (E.g.:
"*mystr" or "mystr*" or "*mystr*") or "*".
CTI routing parameter(s):
DESCR: Entry description. From 0 up to 70 Alphanumeric extended
characters. Case is preserved. Spaces are allowed.
Strings holding spaces must be written between quotation
marks (E.g. "str1 str2").
In standard format it is displayed only when not empty.
In reduced format it is not displayed.
ACT: Active/usable record flag [NO, YES]
In standard/reduced format it is displayed only when equal to NO.
EDT: Editable by HTTP users record flag [NO, YES]
In standard/reduced format it is displayed only when equal to YES.
BCI: Bearer capability input [TR, DATA, VOICE, Speech, 3.1Khz, UDI,
RDI, UDI-TA, Video]
POI: Input port/group [#, *, **, G*, G0..G32, PBX, 1..600, Sl, Iax,
Sip, Disa, Vo], where:
* = Any CTI port ISDN/POTS/VPOTS/CELL;
** = Any CTI port, including Iax, Sip, Disa, Vo.
SR: Input cluster/group [#, *, G*, G0..G32, cluster name or EC/RU/MR
list name between single quote].
The cluster name must correspond to an existing CTI cluster.
The list name must correspond to an existing EC/RU/MR list.
GI: Input group [#, G*, G0..G32]
OUT: Output group/port/cluster [#, G0..G32, PBX, 1..600, Sl, Iax, Sip
Disa, Vo, Vm, Mix, Sl, <AUTO-I>, <AUTO-O>.
The cluster name must correspond to an existing CTI cluster.
NEXT: Alternative routing selection [N (or NO), U (or UNLIMITED),
L (or LIMITED), T (or TRANSFERT), BB (or BUTBUSY)] or the name
of ICAUSE/RU/MR list between single quotes (E.g.: T or BUTBUSY
or 'my_causes').
LAST: Alternative routing, last failure reason for conditional match
[ANY, BUSY, NOANS, OTHER] or the name of ICAUSE/RU/MR list between
single quotes (E.g.: NOANS or 'my_causes').
EEC: Extended echo canceller activation [NO, IN, OUT, BOTH]
CDI: Input called address [0..9, *, #, ?, 'list'], optionally preceded by
TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes,
or [##, $].
(E.g.: 123, 123*, 12?, 12?*, *, #, ##, $, 'listname', 123'listname')
See HELP ISDN ATTRIBUTES for details on attributes.
See HELP SPECIAL VALUES for details on meaning of special values.
CDO: Output called address [0..9, *, #, 'macro'], optionally preceded by
TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes.
(E.g.: 123, *, #, 123'cdi', 'cdi'123'cgi.s5', 'sdi', ''listname'',
''listname.cd'', ''listname.cg'.s2', ''listname'.s5')
See HELP ISDN ATTRIBUTES for details on attributes.
See HELP ISDN VALUES for details on meaning of special values.
CGI: Input calling address [0..9, *, #, ?, 'list'], optionally preceded
by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] and/or
PI [a, r, m, q] and/or SI [y, v, w, z, j] attributes, or [##, $].
(E.g.: 123, 123*, 12?, 12?*, *, #, ##, $, 'listname', 123'listname')
See HELP ISDN ATTRIBUTES for details on attributes.
See HELP ISDN VALUES for details on meaning of special values.
CGO: Output calling address [0..9, *, #, 'macro'], optionally preceded
by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] and/or
PI [a, r, m, q] and/or SI [y, v, w, z] attributes.
(E.g.: 123, *, #, 123'cdi', 'cdi'123'cgi.s5', 'sdi', ''listname'',
''listname.cd'', ''listname.cg'.s2', ''listname'.s5',
12''listname''34)
See HELP ISDN ATTRIBUTES for details on attributes.
See HELP ISDN VALUES for details on meaning of special values.
SDI: Input called sub-address [AlphaNumExt, *, ?, #, ##, $, 'list'].
(E.g.: ho11, me1*, ho??12?, ho?12?*, *, #, 'listname', AA'listname')
See HELP ISDN VALUES for details on meaning of special values.
SDO: Output called sub-address [AlphaNumExt, *, #, 'macro'].
(E.g.: home123, *, #, home123'sgi', 'sgi'home123'cdi.s5', 'sdi'
''listname.cd'', ''listname.cg'.s2', ''listname'.s5',
AAA''listname.cd'', AAA'sdi'BBB''listname'.s5')
See HELP ISDN VALUES for details on meaning of special values.
SGI: Input calling sub-address [AlphaNumExt, *, ?, #, ##, $, 'list'].
(E.g.: ho11, me1*, ho??12?, ho?12?*, *, #, 'listname', AA'listname')
See HELP ISDN VALUES for details on meaning of special values.
SGO: Output calling sub-address [AlphaNumExt, *, #, 'macro'].
(E.g.: home123, *, #, home123'sgi', 'sgi'home123'cdi.s5', 'sdi'
''listname.cd'', ''listname.cg'.s2', ''listname'.s5',
AAA''listname.cd'', AAA'sgi'BBB''listname'.s5')
See HELP ISDN VALUES for details on meaning of special values.
RGI: Input redirecting address [0..9, *, #, ?, 'list'], optionally
preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p]
and/or PI [a, r, m, q] and/or SI [y, v, w, z, j] attributes,
or [##, $].
(E.g.: 123, 123*, 12?, 12?*, *, #, ##, $, 'listname', 123'listname')
See HELP ISDN ATTRIBUTES for details on attributes.
See HELP ISDN VALUES for details on meaning of special values.
RGO: Output redirecting address [0..9, *, #, 'macro'], optionally
preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p]
and/or PI [a, r, m, q] and/or SI [y, v, w, z] attributes.
(E.g.: 123, *, #, 123'cdi', 'cdi'123'cgi.s5', 'sdi', ''listname'',
''listname.cd'', ''listname.cg'.s2', ''listname'.s5',
12''listname''34)
See HELP ISDN ATTRIBUTES for details on attributes.
See HELP ISDN VALUES for details on meaning of special values.
BCO: Bearer capability output [*, Speech, 3.1Khz, UDI, RDI, UDI-TA,
Video]
T301: Alerting time-out [Dft, 5..180 sec.]
UDT: Unconditional disconnect timer [NO, 1..9999 sec.]
LCS: Enable/disable Last Calling number Service [NO, YES]
LCST: Last Calling number Service records timeout [Sys, NONE, 1..999 hour]
IG: Input gain [Sys, MUTE, -31..+31 dB]
OG: Output gain [Sys, MUTE, -31..+31 dB]
SG: Attenuation of DTMF or Tone signals respect to their configured
values [Sys, -31..0 dB]
DL: Output volume of lower DTMF tone [Sys, MUTE, -31..+3 dBm]
DH: Output volume of higher DTMF tone [Sys, MUTE, -31..+3 dBm]
FMRLY: Fax/Data relay [NO, YES, Sys]
FAXSP: Fax maximum speed [AUTO or 0, 2400, 4800, 7200, 9600, 12000,
14400 bps]
MODSP: Modem maximum speed [AUTO or 0, 2400, 4800, 7200, 9600, 12000,
14400 bps]
FMLVL: Output volume of Fax/Data signal [Sys, -18..-3 dBm]
FMDJ: Fax/Data default jitter buffer size [Sys, 0..1000 ms]
FMMJ: Fax/Data maximum jitter buffer size [Sys, 0..1000 ms]
ECM: Enable/disable ECM (Error Correcting Mode) for fax [NO, YES, Sys]
SP: Voice compression bit rate [5300, 6000, 6300, 6400, 7200, 8000,
8800, 9600, 11200, 13200, 13340, 15200, 16000, 18400, 24000,24800,
32000, 40000, 64000 bps]
SC: Silence compression [NO, YES, Sys]
DJ: Default jitter buffer size [*, Sys, 0..1000 ms]
It must be minor or equal to MJ.
MJ: Maximum jitter buffer size [*, Sys, 0..1000 ms]
It must be major or equal to DJ.
CODERS: Allowed coders [* or Sys or NONE or a list of one or more coder
values (see below)].
The available coders are [Transp, G.711, G.726, G.727, GSM6.10,
Spirit, G.723.1, G.729A, ILBC, SPEEX, G.711A, G.711u]. Values can be
joined using "," operator. The position in the list defines the
preference order. The right-most value is the one with the lowest
preference.
SPOUT: Maximum preferred/allowed bit rate for the audio coder on output
side of direct transcoding [*, 5300, 6000, 6300, 6400, 7200, 8000,
8800, 9600, 11200, 13200, 13340, 15200, 16000, 18400, 24000,
24800, 32000, 40000, 64000 bps]
SCOUT: Silence compression output [*, Sys, NO, YES]
DJOUT: Default jitter buffer size output [*, Sys, 0..1000 ms]
It must be minor or equal to MJOUT.
MJOUT: Maximum jitter buffer size output [*, Sys, 0..1000 ms]
It must be major or equal to DJOUT.
CODERSOUT: Preferred list of coders for THIS routing offered to called side
[* or Sys or NONE or *,Sys or a list of one or more coder values
(see below) or *,list]
The available coders are [Transp, G.711, G.726, G.727, GSM6.10,
Spirit, G.723.1, G.729A, ILBC, SPEEX, G.711A, G.711u]. Values can be
joined using "," operator. The position in the list defines the
preference order. The right-most value is the one with the lowest
preference.
TI1:..TI5: Time interval in the format "day,hh:mm-hh:mm", where 'day' can be:
- a single day of the week [MO, TU, WE, TH, FR, SA, SU] or
- a set of days of the week (E.g.: MO+TH or TU+TH+SU) or
- a range of days of the week (E.g.: MO-WE or TH-SU) or
- a date in the format "dd/mm/yy", where
- 'dd' can be [*, 1..31]
- 'mm' can be [*, 1..12]
- 'yy' can be [*, 0..99]
(e.g. 23/12/13 or 31/12/* or 1/*/* or */8/* or 1/04/*) or
- begin and end date separated by '-', i.e. "d1/m1/y1-d2/m2/y2", where
- 'd1' and 'd2' can be [*, 1..31]
- 'm1' and 'm2' can be [*, 1..12]
- 'y1' and 'y2' can be [*, 0..99]
(e.g. 23/12/13-07/01/14 or 23/12/*-07/01/* or 01/*/*-5/*/*) or
- "ALL".
Use "#" to disable the time interval (i.e. 'no match').
The below command filters all rules whose BCI
is VOICE and OUT is PBX:
[15:03:40] ABILIS_CPX:d ctir bci:voice out:pbx
Last change: 16/06/2015 12:23:13 CET
---+------+-----------------+---------+--------------------+--------------------
PR |[DESCR]
|BCI |POI |SR |GI |OUT |CDI |CDO
ACT|NEXT |LAST |EEC |T301|CGI |CGO
EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO
|SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO
| |BCO |RGI |RGO
|FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH
|CODERS
|CODERSOUT
|TI1 .. TI5
--------------------------------------------------------------------------------
21 VOICE Sip # # PBX 5?? *
NO ANY NO Dft * *
64000 Sys Sys Sys Sys Sys * *
* * * * NO Sys * *
* * *
Sys AUTO AUTO Sys SYS NO Sys Sys Sys Sys Sys
Sys
G.711
-----------------------------------------------------------------------------------
These two parameters have been introduced to insert the right value in the CG field for transferred calls and for centrals which doesn't comply with ISDN standard.
Assuming to have a user who calls a number on which there's a call transfer and supposing that:
The user's phone number is 07779660;
The called number is 08889661;
The call is forwarded toward number 01111.
The calling number received from 01111 is the user's phone number 08889661. The number 07779660 is stored in a field called RG, according to ISDN standard.
When the transferred call reaches centrals not complying to ISDN standard, a trick can be used: Abilis can store the number of the initial caller (07779660) in the CG field, while the number which transfers calls is stored in the RG field.
A call originated by a call transfer may be identified because RG field isn't empty, while a normal call has RG field empty. This is used to create special routings which are effective only for call transfers.
Use the following values to intercept normal calls:
| RGI:## | Missing information element |
| RGI:# | Missing or Empty information element |
Set the RGI parameter to a specific value to intercept only calls originated by call transfers.
Setting RGI:*, the rule intercepts every kind of call (transferred or not). The following table shows the range of RGI values:
[14:43:43] ABILIS_CPX:help isdn values
Meaning of special values used in ISDN CDI/CGI/SGI/SDI/RGI fields:
-----------+-------------------------------------------------------------------
Symbol | Meaning
-----------+-------------------------------------------------------------------
* | Don't care.
# | Missing or Empty information element
## | Missing information element
$ | Empty or Non-empty information element
?* | Non-empty information element
-----------+-------------------------------------------------------------------
Meaning of special values used in ISDN CDO/CGO/SGO/SDO/RGO fields:
-----------+-------------------------------------------------------------------
Symbol | Meaning
-----------+-------------------------------------------------------------------
* | Pass correspondent input field untouched.
# | Set an empty information element. An empty information element in
| most cases is removed.
-----------+-------------------------------------------------------------------The following are the log and CTI connection shown during a normal call from 901 to 902. Please note that there RGO field is empty.
[09:58:51] ABILIS_CPX:_start ldmeCurrent Local Time: Wednesday 17/09/2015 14:10:29 (UTC+2.00) Start Debug Log content real-time logging (Type CTRL+C + ENTER to stop): Date Time Resource Ses Id Event Parameters ------ ------ ---------- ----- ---- -------------- -------------------------------------- 170915 141035 CtiP-149 6 6 E-DialRx CH:1 BC:Speech CG:uxq901 USER:test 170915 141035 CtiP-149 6 6 E-CallRx CH:1 BC:Speech CD:ux902 CG:uxq901 170915 141035 CtiP-149 6 6 E-Route Match PR:4 170915 141035 CtiP-102 6 6 E-CallTx BC:Speech TY:TR CD:ux902 CG:uxq901 170915 141035 CtiP-149 6 6 E-NumComplete CDI:ux902 CDO:ux902 170915 141035 CtiP-102 6 6 E-AlertRx CH:1 USER:test2 170915 141035 CtiP-149 6 6 E-AlertTx CH:1 PI:81 88 PREVIOUS COMMAND(s) ABORTED [09:59:08] ABILIS_CPX:_d ctice------------------------------------------------------------------------------- SES:6 TYPE:TR ST:ALERT PR:4 STI:07/00 STO:04/00 EEC:NO ID :6 START:17/09/2015 14:12:23 DURATION:0 REMAINING:- IN:149 BCI:Speech OUT:102 BCO:Speech CDI:ux902 CDO:ux902 CGI:uxq901 CGO:uxq901 SDI: SDO: SGI: SGO: RGI: RGO:
The following are logs and CTI connection shown during a transferred call. User test (phone number 901) calls user:test2 (phone number 902). User test2 transfers calls to a cellphone (phone number 333xxxxxx). Please note that RGO field isn't empty, because there's a transferred call.
[12:28:00] ABILIS_CPX:_start ldmeCurrent Local Time: Wednesday 17/09/2015 14:20:41 (UTC+2.00) Start Debug Log content real-time logging (Type CTRL+C + ENTER to stop): Date Time Resource Ses Id Event Parameters ------ ------ ---------- ----- ---- -------------- -------------------------------------- 170915 142045 CtiP-149 10 10 E-DialRx CH:1 BC:Speech CG:uxq901 USER:test 170915 142045 CtiP-149 10 10 E-CallRx CH:1 BC:Speech CD:ux902 CG:uxq901 170915 142045 CtiP-149 10 10 E-Route Match PR:4 170915 142045 CtiP-102 10 10 E-CallTx BC:Speech TY:TR CD:ux902 CG:uxq901 170915 142045 CtiP-102 10 10 E-CallForward RULE:ALWAYS USER:test2 170915 142045 CtiP-149 10 10 E-NumComplete CDI:ux902 CDO:ux902 170915 142045 CtiP-102 10 11 E-CallRx CH:0 BC:Speech CD:ux8333xxxxxx CG:uxq901 RG:uxay902 USER:test2 170915 142045 CtiP-102 10 11 E-Route Match PR:10 170915 142045 CtiCl-1 10 11 E-CallTx BC:Speech TY:VtoC CD:ux8333xxxxxx CG:uxq901 RG:uxay902 CODERS:Spirit 170915 142045 CtiP-102 10 11 E-NumComplete CDI:ux8333xxxxxx CDO:ux333xxxxxx 170915 142045 CtiP-102 10 12 E-CallTransfer SES/ID-IN:11 SES/ID-OUT:10 T301:179 170915 142046 CtiCl-1 10 12 E-ProgressRx CODERS:Spirit 170915 142046 CtiCl-1 10 12 E-ProgressRx CODERS:Spirit 170915 142046 CtiCl-1 10 12 E-AlertRx CH:34 CODERS:Spirit 170915 142046 CtiP-149 10 12 E-AlertTx CH:1 PI:81 88 PREVIOUS COMMAND(s) ABORTED [12:28:35] ABILIS_CPX:_d ctice------------------------------------------------------------------------------- SES:10 TYPE:VtoC ST:ACTIVE PR:TRS[4/10] STI:10/00 STO:10/00 EEC:NO ID :12 START:17/09/2015 14:24:14 DURATION:2 REMAINING:- IN:149 BCI:Speech OUT:Clus1 BCO:Speech CDI:ux902 CDO:ux333xxxxxx CGI:uxq901 CGO:uxq901 SDI: SDO: SGI: SGO: RGI: RGO:uxay902 CODER:Spirit SP:6400 FMRLY:YES FAXSP:7200 DJ:50 FMDJ:200 CTIAC:2 BW:8800 SC:NO MODSP:7200 MJ:250 FMMJ:400 MODE:- CurJ:0 TopJ:0 AvgJ:0 FaxPg:0 ECM:YES UND:0 OVR:0
The CTI routing pr:5 is used to call the cellphone. This rule intercept normal calls and transferred calls, because RGI:*.
[12:37:26] ABILIS_CPX:_d ctire pr:5
Last change: 17/09/2015 10:01:34 CET
-------------------------------------------------------------------------------
PR:5 DESCR:
ACT:YES EDT:NO BCI:VOICE BCO:* EEC:NO
NEXT:NO POI:PBX SR:# GI:# OUT:Clus1
LAST:ANY CDI:8?* CDO:'CDI.S2'
T301:Dft CGI:* CGO:*
UDT:NO SDI:* SDO:*
LCS:NO SGI:* SGO:*
LCST:Sys RGI:* RGO:*
IG:Sys OG:Sys SG:Sys DL:Sys DH:Sys
FMRLY:Sys FAXSP:AUTO MODSP:AUTO FMLVL:Sys FMDJ:Sys FMMJ:Sys
SP:6400 SC:Sys DJ:Sys MJ:Sys ECM:SYS
CODERS:Sys
SPOUT:* SCOUT:* DJOUT:* MJOUT:*
CODERSOUT:*
TI1:ALL,00:00-23:59 TI2:# TI3:# TI4:# TI5:#
Example: administrator can configure Abilis so that users cannot transfer calls to cellphones. Rule pr:5 must be modified setting RGI:## and rule pr:6 must be created.
[12:40:26] ABILIS_CPX:_s ctir pr:5 rgi:##COMMAND EXECUTED [12:40:34] ABILIS_CPX:_d ctire pr:5Last change: 17/09/2015 10:01:34 CET ------------------------------------------------------------------------------- PR:5 DESCR: ACT:YES EDT:NO BCI:VOICE BCO:* EEC:NO NEXT:NO POI:PBX SR:# GI:# OUT:Clus1 LAST:ANY CDI:8?* CDO:'CDI.S2' T301:Dft CGI:* CGO:* UDT:NO SDI:* SDO:* LCS:NO SGI:* SGO:* LCST:Sys RGI:## RGO:* IG:Sys OG:Sys SG:Sys DL:Sys DH:Sys FMRLY:Sys FAXSP:AUTO MODSP:AUTO FMLVL:Sys FMDJ:Sys FMMJ:Sys SP:6400 SC:Sys DJ:Sys MJ:Sys ECM:SYS CODERS:Sys SPOUT:* SCOUT:* DJOUT:* MJOUT:* CODERSOUT:* TI1:ALL,00:00-23:59 TI2:# TI3:# TI4:# TI5:# [12:44:49] ABILIS_CPX:_a ctir pr:6 poi:pbx out:none cdi:8* cdo:'cdi.s2' rgi:?* sp:64000 coders:g.711COMMAND EXECUTED [12:44:57] ABILIS_CPX:_d ctire pr:6- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- Last change: 17/09/2015 10:01:34 CET ------------------------------------------------------------------------------- PR:6 DESCR: ACT:YES EDT:NO BCI:VOICE BCO:* EEC:NO NEXT:NO POI:PBX SR:# GI:# OUT:# LAST:ANY CDI:8* CDO:'CDI.S2' T301:Dft CGI:* CGO:* UDT:NO SDI:* SDO:* LCS:NO SGI:* SGO:* LCST:Sys RGI:?* RGO:* IG:Sys OG:Sys SG:Sys DL:Sys DH:Sys FMRLY:Sys FAXSP:AUTO MODSP:AUTO FMLVL:Sys FMDJ:Sys FMMJ:Sys SP:64000 SC:Sys DJ:Sys MJ:Sys ECM:SYS CODERS:G.711 SPOUT:* SCOUT:* DJOUT:* MJOUT:* CODERSOUT:* TI1:ALL,00:00-23:59 TI2:# TI3:# TI4:# TI5:#
The following is the log of a transferred call to a cellphone: the call fails.
[12:46:17] ABILIS_CPX:_start ldme
Current Local Time: Wednesday 17/09/2015 14:40:03 (UTC+2.00)
Start Debug Log content real-time logging (Type CTRL+C + ENTER to stop):
Date Time Resource Ses Id Event Parameters
------ ------ ---------- ----- ---- -------------- --------------------------------------
170915 144009 CtiP-149 16 16 E-DialRx CH:1 BC:Speech CG:uxq901 USER:test
170915 144009 CtiP-149 16 16 E-CallRx CH:1 BC:Speech CD:ux902 CG:uxq901
170915 144009 CtiP-149 16 16 E-Route Match PR:4
170915 144009 CtiP-102 16 16 E-CallTx BC:Speech TY:TR CD:ux902
CG:uxq901
170915 144009 CtiP-102 16 16 E-CallForward RULE:ALWAYS USER:test2
170915 144009 CtiP-149 16 16 E-NumComplete CDI:ux902 CDO:ux902
170915 144009 CtiP-102 16 17 E-CallRx CH:0 BC:Speech CD:ux8333xxxxxx
CG:uxq901 RG:uxay902 USER:test
170915 144009 CtiP-102 16 17 E-Route Match PR:6
170915 144009 CtiP-102 16 17 E-InternalFail PR:6 CAUSE:FF A8 (CPX, No port
available (NO_PORT))
170915 144009 CtiP-102 16 17 E-Route Fail PR:11 CAUSE:FF A8 (CPX, No port
available (NO_PORT))
170915 144009 CtiP-102 16 17 E-CallFailTx CH:0 CAUSE:81 83 (LPN, No route
to destination)
170915 144009 CtiP-149 16 16 E-DiscTx CH:1 CAUSE:80 80 (U, Description
not available) USER:testIt adds a new CTI routing with PR:xx priority setting the indicated parameters to the specified values. Unspecified parameters are set to default values. The CTI routing table can store up to 256 routing definitions, so the priority value must be in the interval [0 - 255].
If a routing with “PR:xx” is already present in the table, it will get “PR:xx+1” priority.
Example: how to configure a routing which routes every call
(CDI:*) coming from the CTI Ports
Group G1 (connected to the PABX) to CTI Ports Group G2 (connected to the
ISDN lines), without any alternative routings.
[15:30:01] ABILIS_CPX:a ctir pr:3 poi:g1 out:g2 cdi:*COMMAND EXECUTED [15:30:50] ABILIS_CPX:d ctire pr:3- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- Last change: 16/06/2015 12:23:13 CET ------------------------------------------------------------------------------- PR:3 DESCR: ACT:YES EDT:NO BCI:VOICE BCO:* EEC:NO NEXT:NO POI:G1 SR:# GI:# OUT:G2 LAST:ANY CDI:* CDO:* T301:Dft CGI:* CGO:* UDT:NO SDI:* SDO:* LCS:NO SGI:* SGO:* LCST:Sys RGI:* RGO:* IG:Sys OG:Sys SG:Sys DL:Sys DH:Sys FMRLY:Sys FAXSP:AUTO MODSP:AUTO FMLVL:Sys FMDJ:Sys FMMJ:Sys SP:6400 SC:Sys DJ:Sys MJ:Sys ECM:SYS CODERS:Sys SPOUT:* SCOUT:* DJOUT:* MJOUT:* CODERSOUT:* TI1:ALL,00:00-23:59 TI2:# TI3:# TI4:# TI5:#
| Warning |
|---|---|
Changes made on the CTI routing table aren't immediately active. To activate them, execute the initialization command init ctir. |
It deletes a CTI routing from the routing table. Priority of remaining routings (if higher than the removed one) are decreased because of table continuity. The syntax of the command is c ctir pr:xx.
[12:28:06] ABILIS_CPX:d ctirLast change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * -------------------------------------------------------------------------------- 2 VOICE G1 # # G2 * * -------------------------------------------------------------------------------- [12:31:19] ABILIS_CPX:c ctir pr:2COMMAND EXECUTED [12:31:51] ABILIS_CPX:d ctirLast change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * --------------------------------------------------------------------------------
| Warning |
|---|---|
Changes made on the CTI routing table aren't immediately active. To activate them, execute the initialization command init ctir. |
Sets the parameters of CTI routing identified by “PR:xx” to their new values. The syntax of the command is:
s ctir pr:xxx parameter:value
[12:37:09] ABILIS_CPX:d ctirLast change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * -------------------------------------------------------------------------------- 2 VOICE G1 # # G2 * * -------------------------------------------------------------------------------- [12:37:32] ABILIS_CPX:s ctir pr:2 out:g3 cdi:528COMMAND EXECUTED [12:37:36] ABILIS_CPX:d ctirLast change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * -------------------------------------------------------------------------------- 2 VOICE G1 # # G3 528 * --------------------------------------------------------------------------------
| Warning |
|---|---|
Changes made on the CTI routing table aren't immediately active. To activate them, execute the initialization command init ctir. |
The routing which has been modified routes the calls coming from
G1 to the group G3 if the called number is
528.
Other interesting parameters
available on CTI Routing tables are T301,
TIx, NEXT, and
DS:<AUTO-I>/<AUTO-O>.
Example: enable a CTI routing just on Tuesday and Wednesday from 18:00 to 20:30.
[12:37:40] ABILIS_CPX:s ctir pr:3 ti1:tu-we,18:00-20:30COMMAND EXECUTED [15:35:00] ABILIS_CPX:d ctire pr:3Last change: 16/06/2015 12:23:13 CET ------------------------------------------------------------------------------- PR:3 DESCR: ACT:YES EDT:NO BCI:VOICE BCO:* EEC:NO NEXT:NO POI:G1 SR:# GI:# OUT:G3 LAST:ANY CDI:528 CDO:* T301:Dft CGI:* CGO:* UDT:NO SDI:* SDO:* LCS:NO SGI:* SGO:* LCST:Sys RGI:* RGO:* IG:Sys OG:Sys SG:Sys DL:Sys DH:Sys FMRLY:Sys FAXSP:AUTO MODSP:AUTO FMLVL:Sys FMDJ:Sys FMMJ:Sys SP:6400 SC:Sys DJ:Sys MJ:Sys ECM:SYS CODERS:Sys SPOUT:* SCOUT:* DJOUT:* MJOUT:* CODERSOUT:* TI1:TU-WE,18:00-20:30 TI2:# TI3:# TI4:# TI5:#
Example: how to combine the use of T301 and
NEXT. Calls must be forwarded to the next routing if
there is no answer after 15 seconds.
[13:50:10] ABILIS_CPX:d ctirLast change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * -------------------------------------------------------------------------------- 2 VOICE G1 # # G2 * * -------------------------------------------------------------------------------- 3 VOICE G2 # # G1 * * -------------------------------------------------------------------------------- [13:50:12] ABILIS_CPX:s ctir pr:3 t301:15 next:tCOMMAND EXECUTED [13:50:43] ABILIS_CPX:a ctir pr:4 poi:g2 out:abilis2 cdi:*COMMAND EXECUTED [13:50:54] ABILIS_CPX:d ctir- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- Last change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * -------------------------------------------------------------------------------- 2 VOICE G1 # # G2 * * -------------------------------------------------------------------------------- 3 VOICE G2 # # G1 * * TRANSFERT ANY NO 15 * * -------------------------------------------------------------------------------- 4 VOICE G2 # # Abilis2 * * --------------------------------------------------------------------------------
| Warning |
|---|---|
Changes made on the CTI routing table aren't immediately active. To activate them, execute the initialization command init ctir. |
When routing PR:3 is matched, the call will alert for 15 seconds on the G1 ports group and if no answer occurs, it will be transferred to the next routing and compressed to “Abilis2”.
Moves the CTI routing priority from the value “PR:xx” to the new value “PR:yy”. Other definitions present in the table are re-sorted because of table continuity.
[13:50:54] ABILIS_CPX:d ctir- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- Last change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * -------------------------------------------------------------------------------- 2 VOICE G1 # # G2 * * -------------------------------------------------------------------------------- 3 VOICE G2 # # G1 * * TRANSFERT ANY NO 15 * * -------------------------------------------------------------------------------- 4 VOICE G2 # # AADM * * -------------------------------------------------------------------------------- [15:38:34] ABILIS_CPX:m ctir pr:3 pr:4 COMMAND EXECUTED [15:38:40] ABILIS_CPX:d ctir- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- Last change: 16/06/2015 12:23:13 CET ---+------+-----------------+---------+--------------------+-------------------- PR |[DESCR] |BCI |POI |SR |GI |OUT |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |BCO |RGI |RGO |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------- 0 DATA * # # Sl * * -------------------------------------------------------------------------------- 1 TR PBX # # PBX 1? * -------------------------------------------------------------------------------- 2 VOICE G1 # # G2 * * -------------------------------------------------------------------------------- 3 VOICE G2 # # AADM * * -------------------------------------------------------------------------------- 4 VOICE G2 # # G1 * * TRANSFERT ANY NO 15 * * --------------------------------------------------------------------------------
| Warning |
|---|---|
Changes made on the CTI routing table aren't immediately active. To activate them, execute the initialization command init ctir. |
A macro-instruction can only contain:
Decimal digits '0' - '9';
Names of input caller's address and sub-address fields: 'CGI' and 'SGI';
Names of input called's address fields and sub-address fields: 'CDI' and 'SDI';
The '.' (dot) character, which is used as a separator;
The sequences ".3xx", ".Lxx" and ".Rxx".
Table 46.4. Table Lxx, Rxx, 3xx macros
| Sequence | Operative meaning |
|---|---|
| yy.Sxx | It takes the characters of field "yyy" starting from position "xx". |
| yyy.Lxx | It takes up to "xx" characters of field "yyy", starting from the leftmost. |
| yyy.Rxx | It takes up to "xx" characters of field "yyy", starting from the rightmost. |
Examples:
CDO:'SGI': the called address field of the outgoing call will contain the same value as is contained in the field for the called sub-address of the incoming call.
CDO:1023'SGI': the called address field of the outgoing call will contain the numerical sequence "1023" followed by the content of the called sub-address of the incoming call.
CDO:1023'SGI.S02': the called address field of the outgoing call will contain the numerical sequence "1023" followed by the content of the called sub-address of the incoming call, starting from the 2nd character (.S02).
CDO:1023'SGI.R02': the called address field of the outgoing call will contain the numerical sequence "1023" followed by at most two characters taken from the content of the called sub-address of the incoming call, starting from the right most (.R02).
Type the following command to display info about macro functions:
[07:32:16] ABILIS_CPX:help isdn macro
ISDN macros permit the manipulation of ISDN numbers and subaddresses in the
call being processed.
Macro must be written between single quotes and can be present only in
output fields CDO/CGO/SDO/SGO (xxO).
A macro may refer a INR list and it's fields, in this case a sort of sub-macro
occurs and a couple of single quotes is required.
In following explanation xx is used to indicate any of CD/CG/SD/SG.
--- Simple macros in CDO/CGO/SDO/SGO (xxO) ------------------------------------
xxO: 'xxI' Copy xxI in xxO
xxO: 'xxI.Sy' Copy xxI in xxO starting from left position y
xxO: 'xxI.Ly' Copy xxI in xxO leftmost y characters
xxO: 'xxI.Ry' Copy xxI in xxO rightmost y characters
--- Macros with INR list sub-macro in CDO/CGO/SDO/SGO (xxO) -------------------
The INR list fields are: Number, CHK, CD, CG.
When a INR list is used in xxO fields macros it works as follow:
if a match is found between Number and field indicated by CHK (CGI or CDI),
the CD or CG field will be used in the preparation of the xxO field,
as specified by the sub-macro.
CDO: ''listname'' Copy list CD field into CDO
CGO: ''listname'' Copy list CG field into CGO
xxO: ''listname.CD'' Copy list CD field into xxO
xxO: ''listname.CD'.Sy' Copy list CD field from position y into xxO
xxO: ''listname.CD'.Ly' Copy list CD field leftmost y characters into xxO
xxO: ''listname.CD'.Ry' Copy list CD field rightmost y characters into xxO
xxO: ''listname.CG'' Copy list CG field into xxO
xxO: ''listname.CG'.Sy' Copy list CG field from position y into xxO
xxO: ''listname.CG'.Ly' Copy list CG field leftmost y characters into xxO
xxO: ''listname.CG'.Ry' Copy list CG field rightmost y characters into xxO
--- Examples ------------------------------------------------------------------
More macros can be written at the same time, the limit is only the 24
characters available in the xxO fields
Here is an example of possible combinations.
If in some circumstance a combination is not allowed you will get an
appropriate message.
'cdi'
123'cdi'
'cdi'123'cgi.s5'
''listname''
''listname.cd''
''listname'.s5'
''listname.cg'.s2'
123''listname.cg'.s2'
'cdi'123''listname.cg'.s2'| |  | |
| 46.5. CTI Link |  | 46.7. CTI routing for POTS devices (“PBX Group”) |