5.13. System management

In this section the most frequently used commands about system management are shown.

With conf and conflog commands it's possible to copy, restore or save configuration and Log files. Below there's the commands syntax:

[15:43:26] ABILIS_CPX:conflog ?

BACKUP         Copy configuration and log files to removable disk
RESTORE        Load configuration files from removable disk

[15:43:26] ABILIS_CPX:conf ?

BACKUP         Copy configuration to removable disk
GET            Sends the configuration in memory to a remote site
INFO           Display/set configuration notes
PUT            Receives configuration from a remote site
RELOAD         Reload the configuration from a file
RESTORE        Alias of the CONFLOG RESTORE command
SAVE           Alias of the SAVE CONF command(s)
VALIDATE       Alias of the VALIDATE command
[Tip]Tip

Interesting chapter: Section 70.8, “How to copy files using a removable drive”.

With file commands it's possible to copy/delete a file or to transfer a file from and to Abilis CF/HD. Abilis supports XMODEM, XMODEM-1K, ZMODEM protocols for file transfer, from and to Abilis (use a terminal emulator which is compatible with the protocols mentioned above, to transfer files or system releases).

[15:43:26] ABILIS_CPX:file ?

COPY           Make a copy of a file
DELETE         Delete a file
GET            Send a file using XMODEM-1K or ZMODEM
PUT            Receive a file using XMODEM/XMODEM-1K or ZMODEM

With sys commands it's possible to manage Abilis CPX system software.

The following command displays the syntax:

[15:43:26] ABILIS_CPX:sys ?

COMPACT        Directory re-compacting operation
COMPACTR       Directory re-compacting operation, recursive
COPY           Make a copy of a file
CREATE         Create a directory
DELETE         Delete operations
DIR            List operations
DISK           Disk and Volume management
DISPLAY        Display operations
GET            Send a file using XMODEM-1K or ZMODEM
PUT            Receive a file using XMODEM/XMODEM-1K or ZMODEM
SET            Set operations
UPDATE         Receive a package or a new disk image and update the system

5.13.1. CONFLOG BACKUP and CONF BACKUP

This command copies configuration and Log files (DRIVERS.CFG, DRIVERS.BCK, DHCP.BND, CPX.LOG, CPX.DBG and CPX.XCP) of the current version or of the specified version to a removable disk.

The <version> string must correspond to an existing version directory in the form 'X.Y.Z' or 'X-Y-Z' or 'Y.Z' or 'Y-Z' or 'Y', where X, Y and Z are decimal digit [0 - 9] (E.g.: 8-0-2).

With the command conf backup it's possible to copy only configuration files.

[15:43:26] ABILIS_CPX:conflog backup

YOU ARE GOING TO BACKUP CONFIGURATION AND LOG FILES OF CURRENT VERSION
TO 'D:\__Abilis_Cpx_Backup_And_Restore__'.
PROCEED (N/Y)?y

PROCEEDING WITH CONFIGURATION AND LOG FILES BACKUP...
FILE 'DRIVERS.CFG'... SUCCESSFULLY COPIED.
FILE 'DRIVERS.BCK'... SUCCESSFULLY COPIED.
FILE 'CPX.LOG'... SUCCESSFULLY COPIED.
FILE 'CPX.DBG'... SUCCESSFULLY COPIED.
FILE 'CPX.XCP'... SUCCESSFULLY COPIED.
FILE 'C:\APP\DHCP\DHCP.BND'... SUCCESSFULLY COPIED.

COMMAND COMPLETED

5.13.2. CONFLOG RESTORE / CONF RESTORE

These commands copy configuration files (DRIVERS.CFG and DRIVERS.BCK) from a removable disk to the current version or to the specified version directory.

The <version> string must correspond to an existing version directory in the form 'X.Y.Z' or 'X-Y-Z' or 'Y.Z' or 'Y-Z' or 'Y', where X, Y and Z are decimal digit [0 - 9] (E.g.: 8-0-2).

[15:43:26] ABILIS_CPX:conflog restore

YOU ARE GOING TO RESTORE CONFIGURATION FILES OF CURRENT VERSION
FROM 'D:\__Abilis_Cpx_Backup_And_Restore__'.
PROCEED (N/Y)?y

PROCEEDING WITH CONFIGURATION FILES RESTORE...
FILE 'D:\__Abilis_Cpx_Backup_And_Restore__\DRIVERS.CFG'... SUCCESSFULLY COPIED.
FILE 'D:\__Abilis_Cpx_Backup_And_Restore__\DRIVERS.BCK'... SUCCESSFULLY COPIED.

COMMAND COMPLETED

5.13.3. FILE COPY

This command makes a copy of the “srcname” file into the specified “dtsname” path/file. The following command displays the syntax.

[15:43:26] ABILIS_CPX:file copy ?

FILE COPY srcname dstname     Make a copy of a file
SYS COPY srcname dstname      Make a copy of a file

srcname        Path or name of the source file to be copied.        <Mandatory>
               When the file path is omitted the running version
               directory path is used.
               Spaces are allowed. Strings holding spaces must be
               written between quotation marks.
               (E.g.: "C:\APP\MY USERS\aaa.log")
dstname        Path or name of the target file.                     <Mandatory>
               When the file path is omitted the running version
               directory path is used.
               Spaces are allowed. Strings holding spaces must be
               written between quotation marks.
               (E.g.: A: or C:\4-3-1\ or Fdsp.bin or C:\4-3-2\drivers.cfg)

The “srcname” must be a file name. If the path is omitted the source file is assumed to be located in the current running version directory.

The “dstname” can either a path or a file name. If the path is omitted the destination directory is assumed to be the current running version directory.

Wildcards characters aren't accepted either in the source file name nor in the destination name.

File copies to root directory aren't allowed.

Log files (Cpx.log, Cpx.dbg and Cpx.xcp) and Cpx.rtb file cannot be overwritten.

5.13.4. FILE DELETE

This command deletes the specified file. The following command displays the syntax.

[15:43:26] ABILIS_CPX:file delete ?

FILE DELETE filename          Delete a file
SYS DELETE FILE filename      Delete a file

filename       Path or name of the file to be deleted.              <Mandatory>
               When the file path is omitted the running version
               directory path is used.
               Spaces are allowed. Strings holding spaces must be
               written between quotation marks.
               (E.g.: "C:\APP\MY DATA\aaa bbb.dat")

The “filename” must be a file name. If the path is omitted the source file is assumed to be located into the current running version directory.

Wildcards characters aren't accepted in the file name.

Files that are located in root directory can't be deleted.

File copies to root directory aren't allowed.

Configuration files, log files (Cpx.log, Cpx.dbg and Cpx.xcp) and any other system file cannot be deleted from the current running version directory.

5.13.5. FILE GET

This command allows to download files from the Abilis CPX. The following command displays the syntax.

[15:43:26] ABILIS_CPX:file get ?

FILE GET [X] fname [<ver>]      Send a file using XMODEM-1K
FILE GET Z fname [<ver>]          Send a file using ZMODEM
SYS GET [X] fname [<ver>]        Send a file using XMODEM-1K
SYS GET Z fname [<ver>]           Send a file using ZMODEM

X or Z         Select the X or Z MODEM protocol (by default XMODEM is used)
               XMODEM transfer is allowed only on files relative to the running
               version directory or to the specified '<ver>' version directory.
               ZMODEM transfer is allowed on any files. For file not relative
               either to the running version directory or to the '<ver>'
               version directory, the absolute file name is required i.e.
               including the full path.
fname          Name of the file to be sent                          <Mandatory>
               Spaces are allowed. Strings holding spaces must be
               written between quotation marks.
               (E.g.: "C:\APP\MY DATA\aaa bbb.dat")
<ver>          String corresponding to a version directory in        <Optional>
               the form [x.y.z or x-y-z or y.z or y-z or y].
               (E.g.: 5.3.1 or 6-1-0 or 2189).
               Accepted only if 'fname' does not contain the full path.

The transfer procedure signals its availability to send the file with the message:

READY TO SEND FILE...

When the transfer is completed the following message is shown:

FILE TRANSFER ENDED, PRESS <ENTER> TO CONTINUE...

After pressing the Enter button, if the transfer was successful, the following message will be shown.

FILE TRANSFER SUCCESFULLY COMPLETED

5.13.6. FILE PUT

This command allows to upload files to the Abilis CPX. The following command displays the syntax:

[15:43:28] ABILIS_CPX:file put ?

FILE PUT [X] fname [<ver>]        Receive a file using XMODEM/XMODEM-1K
FILE PUT Z fname [<ver>]          Receive a file using ZMODEM
SYS PUT [X] fname [<ver>]         Receive a file using XMODEM/XMODEM-1K
SYS PUT Z fname [<ver>]           Receive a file using ZMODEM

X or Z         Select the X or Z MODEM protocol (by default XMODEM is used)
               XMODEM transfer is allowed only on files relative to the running
               version directory or to the specified '<ver>' version directory
               and only DRIVERS.CFG, DRIVERS.BCK, DHCP.BND, IKE.CNS files and
               mandatory fw files and optional USB devices and cards fw files
               are allowed.
               ZMODEM transfer is allowed on any files. For file not relative
               either to the running version directory or to the '<ver>'
               version directory, the absolute file name is required i.e.
               including the full path.
fname          Name of the file to be received                      <Mandatory>
               Spaces are allowed. Strings holding spaces must be
               written between quotation marks.
               (E.g.: "C:\APP\MY DATA\aaa bbb.dat")
<ver>          String corresponding to a version directory in        <Optional>
               the form [x.y.z or x-y-z or y.z or y-z or y].
               (E.g.: 5.3.1 or 6-1-0 or 2189).
               Accepted only if 'fname' does not contain the full path.

The transfer procedure signals its availability to receive the file by the message:

READY TO RECEIVE FILE...

When the transfer is completed the following message is shown:

FILE TRANSFER ENDED, PRESS <ENTER> TO CONTINUE...

After pressing the Enter button, if the transfer was successful, the following message will be shown.

FILE TRANSFER SUCCESFULLY COMPLETED

Once the file is received, it's submitted to a congruence control for checking its content validity. The User is informed through the message:

RECEIVED FILE 'namefile' CHECK IN PROGRESS...

If the file content isn't correct:

CHECK FAILED: FILE 'namefile' DELETED

If file content and version are correct:

CHECK PASSED

5.13.7. SYS COMPACT

This command compacts the specified directory. It's useful when a lot of files have been deleted or renamed in a directory to reduce its size.

[14:13:06] ABILIS_CPX:sys compact c:       

COMPACTING DIRECTORY 'c:' ...
COMMAND EXECUTED, RECOVERED 2 SHORT DIRECTORY ENTRIES
[Note]Note

This command copies all used directory entries to the start of the directory and zeros out all slack space. If the slack space is larger than one cluster, the slack space is freed, reducing the allocated size of a directory.

5.13.8. SYS COMPACTR

This command compacts specified directory and sub-directories. It's useful when a lot of files have been deleted or renamed in a directory and sub-directories to reduce their size.

[14:14:43] ABILIS_CPX:sys compactr c:

THIS OPERATION MAY TAKE FEW MINUTES AND LOCKS ACCESS TO DISK c:
PROCEED ANYWAY (N/Y)?y

COMPACTING DIRECTORY 'c:' AND ALL OF ITS SUBDIRECTORIES...
COMMAND EXECUTED, RECOVERED 0 SHORT DIRECTORY ENTRIES
[Note]Note

This command copies all used directory entries to the start of the directory and zeros out all slack space. If the slack space is larger than one cluster, the slack space is freed, reducing the allocated size of a directory.

5.13.9. SYS DELETE PACKAGE

This command deletes the specified package file. Use sys delete package <name of package> where <name of package> must be the name of a package file located in 'C:\pkg' or an absolute package file name (the full path is required).

[14:21:22] ABILIS_CPX:sys delete package test.pkg                  

YOU ARE GOING TO DELETE THE 'C:\PKG\TEST.PKG' PACKAGE FILE.
PROCEED (N/Y)?y

PACKAGE 'C:\PKG\TEST.PKG' DELETED

5.13.10. SYS DELETE VERSION

It deletes the specified version directory.

[14:23:25] ABILIS_CPX:sys dir c:\

Directory listing of c:\

PKG                                              <DIR>   18/02/2015   18:02:46
LOG                                              <DIR>   18/02/2015   18:02:46
USR                                              <DIR>   18/02/2015   18:02:46
7-9-14                                           <DIR>   07/04/2015   13:08:18
8-0-2                                            <DIR>   16/04/2015   11:40:50
LICENCE                                          <DIR>   18/02/2015   18:52:12
7-9-10                                           <DIR>   18/02/2015   18:52:12
APP                                              <DIR>   18/02/2015   18:52:12
BM.CFG                                             108   16/04/2015   11:44:46
autorun.inf                                      14229   18/04/2014   14:03:52
BM.LOG                                            4096   16/04/2015   11:44:46
TIMECFG.DAT                                         30   22/04/2015   11:45:42
CPXRUN.CFG                                          80   16/04/2015   11:45:02
BOOTSECT.RTT                                       512   18/02/2015   18:51:58
bm.RTA                                          107008   18/02/2015   18:51:58

8 directory, 7 file (126,063 byte).
Total 121 MiB, Used 36 MiB, Free 84 MiB.

[14:23:42] ABILIS_CPX:sys delete version 7-9-10

YOU ARE GOING TO DELETE THE 'C:\7-9-10' VERSION DIRECTORY.
PROCEED (N/Y)?y

VERSION 'C:\7-9-10' DELETED

[14:24:23] ABILIS_CPX:sys dir c:\

Directory listing of c:\

PKG                                              <DIR>   18/02/2015   18:02:46
LOG                                              <DIR>   18/02/2015   18:02:46
USR                                              <DIR>   18/02/2015   18:02:46
7-9-14                                           <DIR>   07/04/2015   13:08:18
8-0-2                                            <DIR>   16/04/2015   11:40:50
LICENCE                                          <DIR>   18/02/2015   18:52:12
APP                                              <DIR>   18/02/2015   18:52:12
BM.CFG                                             108   16/04/2015   11:44:46
autorun.inf                                      14229   18/04/2014   14:03:52
BM.LOG                                            4096   16/04/2015   11:44:46
TIMECFG.DAT                                         30   22/04/2015   11:45:42
CPXRUN.CFG                                          80   16/04/2015   11:45:02
BOOTSECT.RTT                                       512   18/02/2015   18:51:58
bm.RTA                                          107008   18/02/2015   18:51:58

7 directory, 7 file (126,063 byte).
Total 121 MiB, Used 24 MiB, Free 96 MiB.

5.13.11. SYS UPDATE

This command makes possible the system software update in two ways:

  • By receiving from a remote source the package file holding the updated software and installing it on the CF/HD in a proper version directory.

    The transfer procedure signals its availability to receive the package file by the following messages:

    [18:01:32] ABILIS_CPX:sys update
    
    SYSTEM UPDATE PROCEDURE
    PLEASE UPLOAD THE PACKAGE FILE.
    
    READY TO RECEIVE PACKAGE...

    When the transfer is completed the following message is shown:

    PACKAGE TRANSFER ENDED, PRESS <ENTER> TO CONTINUE...

    Once the Enter button is pressed by the User, if the transfer was successful, an informative message will be shown and the system will start the received package integrity check procedure. If the received package passes the validation procedure, the software extraction and installation takes place.

    PACKAGE TRANSFER SUCCESSFULLY COMPLETED
    
    RECEIVED PACKAGE CHECK and EXTRACTION IN PROGRESS...
    CHECK PASSED, EXTRACTION DONE.
    
    VERSION '8-0-2' SUCCESSFULLY INSTALLED.
  • By a package file already present in the 'C:\PKG' directory, installing it on the HD/CF in a proper version directory.

    In this case the package file name specification is required by the User on the command line: sys update <package>. The <package> string must be the name of a package file located in 'C:\PKG' or an absolute package file name (i.e. The full path is required). If the specified package file isn't present, the message “FILE 'C:\PKG\<package> NOT FOUND” will be shown.

    The procedure starts with a package integrity check. If the package passes the validation phase, the software extraction and installation takes place.

    [18:01:32] ABILIS_CPX:sys update 8-0-2
    
    PACKAGE 'C:\PKG\8-0-2.PKG' CHECK and EXTRACTION IN PROGRESS (8-0-2)...
    CHECK PASSED, EXTRACTION DONE.
    
    VERSION '8-0-2' SUCCESSFULLY INSTALLED.

If the package verifications and extraction is successful, the package file is always deleted.

If the procedure fails for any reason, the package deletion takes place only after the User confirmation.

The list of currently available package files can be displayed by the command sys display packages; while a package file can be deleted by the command sys delete package.

Once a new software version is installed on the system, it can be set to be loaded at next system startup by the command sys set boot version. The list of the currently available versions can be displayed by the command sys display versions. Old versions, not longer useful, can be deleted by the command sys delete version.

5.13.12. SYS DIR

It shows the directory listing of the specified path.

[14:26:13] ABILIS_CPX:sys dir c:\

Directory listing of c:\

PKG                                              <DIR>   18/02/2015   18:02:46
LOG                                              <DIR>   18/02/2015   18:02:46
USR                                              <DIR>   18/02/2015   18:02:46
7-9-14                                           <DIR>   07/04/2015   13:08:18
8-2-2                                            <DIR>   25/09/2015   10:24:30
vs                                               <DIR>   06/05/2015   07:14:44
8-0-3                                            <DIR>   20/05/2015   15:22:46
8-3-2                                            <DIR>   24/12/2015   08:24:02
LICENCE                                          <DIR>   18/02/2015   18:52:12
APP                                              <DIR>   18/02/2015   18:52:12
8-3-1                                            <DIR>   13/11/2015   07:39:36
BM.CFG                                             107   15/01/2016   00:40:34
autorun.inf                                      14229   18/04/2014   14:03:52
BM.LOG                                            4096   15/01/2016   00:40:36
TIMECFG.DAT                                         30   19/01/2016   10:47:26
ETHMAC.DAT                                         256   15/01/2016   00:40:42
CPXRUN.CFG                                          80   15/01/2016   00:41:02
BOOTSECT.RTT                                       512   18/02/2015   18:51:58
bm.RTA                                          107008   18/02/2015   18:51:58

11 directory, 8 file (126,318 byte).
Total 121 MiB, Used 81 MiB, Free 40 MiB.

5.13.13. SYS DISK INFO

It displays logical drive(s) information.

[14:43:07] ABILIS_CPX:sys disk info

Logical drive(s) information:

Drv Disk   Label       FAT     Free space      Used space      Total space
    Interface          Sectors per block       Cluster size    Bootable
-------------------------------------------------------------------------------
C:  HD-0               16      72 MB           52 MB           124 MB
    IDE-PIO-32         1                       2,048 Bytes     YES
-------------------------------------------------------------------------------
D:  HD-4   USB_DRIVE   32      976 MB          2 KB            976 MB
    USB                                        2,048 Bytes     YES
-------------------------------------------------------------------------------

5.13.14. SYS DISK CHK

It checks the disk drive integrity.

[14:27:57] ABILIS_CPX:sys disk chk

THIS OPERATION MAY TAKE FEW MINUTES AND LOCKS ACCESS TO ALL DISKS.
PROCEED ANYWAY (N/Y)?y

DISK 'C:' INTEGRITY CHECK IN PROGRESS...
DISK 'C:' INTEGRITY CHECK SUCCESSFULLY COMPLETED

NO ERRORs WERE FOUND

Use sys disk chk ? to display the options.

[10:53:26] ABILIS_CPX:sys disk chk ?

SYS DISK CHK [<drive>] [opt]              Check disk drive integrity

<drive>    Drive name [C:,..,Z:] (by default C:)                     <Optional>
opt:       Option [-F, -FE, -V, -S, -L]                              <Optional>

Disk check options:

-F         Enable error fixing, except file size errors
-FE        Enable error fixing, file size errors included
-S         Enable silent mode (check disk statistics are displayed only)
-V         Enable verbose mode (this option extends default verbose mode)
-L         Displays the list of the detectable errors

5.13.15. SYS DISK FORMAT

It formats the specified drive. Note that system drive c: can't be formatted.

[14:35:22] ABILIS_CPX:sys disk format d: 

DO YOU REALLY WANT TO FORMAT DRIVE 'D:' (N/Y)?y

THIS OPERATION WILL DELETE ALL EXISTING DATA FROM DRIVE 'D:'.
PROCEED ANYWAY (N/Y)?y

DRIVE 'D:' FORMAT IN PROGRESS... DONE.

ENTER VOLUME LABEL (MAX. 11 CHARACTERs, PRESS <ENTER> FOR NO LABEL): udisk

DRIVE 'D: FORMATTED:

 FILE SYSTEM IS FAT-32, Size: 976 MB
 Bytes per sector: 512, Sectors per cluster: 4, Clusters: 500054
 Serial N. 3E35-746F, Label: UDISK

COMMAND COMPLETED

5.13.16. SYS DISK LABEL

It sets the label of the selected drive or remove any existing label.

[14:41:40] ABILIS_CPX:sys disk label d:

ENTER VOLUME LABEL (MAX. 11 CHARACTERs, PRESS <ENTER> FOR NO LABEL): usb_drive

COMMAND EXECUTED 

[14:41:51] ABILIS_CPX:sys disk info

Logical drive(s) information:

Drv Disk   Label       FAT     Free space      Used space      Total space
    Interface          Sectors per block       Cluster size    Bootable
-------------------------------------------------------------------------------
C:  HD-0               16      72 MB           52 MB           124 MB
    IDE-PIO-32         1                       2,048 Bytes     YES
-------------------------------------------------------------------------------
D:  HD-4   USB_DRIVE   32      976 MB          2 KB            976 MB
    USB                                        2,048 Bytes     YES
-------------------------------------------------------------------------------

5.13.17. SYS DISK MBR DUMP

It displays the Master Boot Record of a disk.

[14:45:58] ABILIS_CPX:sys disk mbr dump hd:0

 Address |             Hexadecimal values                  |  Ascii values
---------+-------------------------------------------------+-----------------
00000000 |  FA BE 00 7C BF 00 7A B9 00 01 FC 0E 1F 0E 07 F3| ...|..z.........
00000010 |  A5 EA 16 7A 00 00 BB BE 7B 33 C9 80 3F 80 75 06| ...z....{3..?.u.
00000020 |  FE C5 8B F3 EB 07 80 3F 00 75 02 FE C1 83 C3 10| .......?.u......
00000030 |  81 FB FE 7B 72 E5 83 F9 04 74 0B 81 F9 03 01 74| ...{r....t.....t
00000040 |  0A BB A6 7A EB 2C BB 87 7A EB 27 8B 4C 02 8B 14| ...z.,..z.'.L...
00000050 |  B8 01 02 BB 00 7C CD 13 73 05 BB BE 7A EB 13 2E| .....|..s...z...
00000060 |  A1 FE 7D 3D 55 AA 74 05 BB BE 7A EB 05 EA 00 7C| ..}=U.t...z....|
00000070 |  00 00 2E 8A 07 3C 00 74 0C 53 BB 07 00 B4 0E CD| .....<.t.S......
00000080 |  10 5B 43 EB ED EB FE 4E 6F 20 62 6F 6F 74 61 62| .[C....No bootab
00000090 |  6C 65 20 70 61 72 74 69 74 69 6F 6E 20 69 6E 20| le partition in 
000000A0 |  74 61 62 6C 65 00 49 6E 76 61 6C 69 64 20 50 61| table.Invalid Pa
000000B0 |  72 74 69 74 69 6F 6E 20 74 61 62 6C 65 00 49 6E| rtition table.In
000000C0 |  76 61 6C 69 64 20 6F 72 20 64 61 6D 61 67 65 64| valid or damaged
000000D0 |  20 42 6F 6F 74 61 62 6C 65 20 70 61 72 74 69 74|  Bootable partit
000000E0 |  69 6F 6E 00 53 79 73 74 65 6D 53 6F 66 74 20 42| ion.SystemSoft B
000000F0 |  6F 6F 74 20 50 61 72 74 69 74 69 6F 6E 20 53 65| oot Partition Se
00000100 |  63 74 6F 72 00 00 00 00 00 00 00 00 00 00 00 00| ctor............
00000110 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000120 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000130 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000140 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000150 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000160 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000170 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000180 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
00000190 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
000001A0 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
000001B0 |  00 00 00 00 00 00 00 00 14 9B 61 92 00 00 80 01| ..........a.....
000001C0 |  01 00 06 07 E0 E8 20 00 00 00 E0 E8 03 00 00 00| ...... .........
000001D0 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
000001E0 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00| ................
000001F0 |  00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 AA| ..............U.

5.13.18. SYS DISK PARTITION INFO

It displays partition(s) information.

[14:47:41] ABILIS_CPX:sys disk partition info

Available Hard Disk(s) information:

HD  Size          Partition Drive Label       FAT     Size        Bootable
-------------------------------------------------------------------------------
0   125 MB        1         C:                16      124 MB      YES
4   984 MB        1         D:    USB_DRIVE   32      976 MB      YES

5.13.19. SYS DISK PARTITION ADD

It adds partition(s) to the specified disk.

[14:47:41] ABILIS_CPX:sys disk partition info

Available Hard Disk(s) information:

HD  Size          Partition Drive Label       FAT     Size        Bootable
-------------------------------------------------------------------------------
0   125 MB        1         C:                16      124 MB      YES
4   984 MB        1         D:    USB_DRIVE   32      976 MB      YES

[14:48:05] ABILIS_CPX:sys disk partition add ?

HD:            Hard disk index [0..31]

[14:48:33] ABILIS_CPX:sys disk partition add hd:4

Hard Disk '4' information:

HD  Size          Partition Drive Label       FAT     Size        Bootable
-------------------------------------------------------------------------------
4   984 MB        1         D:    USB_DRIVE   32      976 MB      YES

HARD DISK '4' ALREADY HOLDS 1 PARTITIONs.
DO YOU WANT TO ADD A NEW PARTITION (N/Y)?y

THIS OPERATION WILL SPLIT PARTITION 1 ('D:') INTO TWO PARTITIONs.
ALL DATA ON 1 ('D:') PARTITION WILL BE LOST.
PROCEED (N/Y)?y

PLEASE ENTER THE SIZE YOU WANT TO RESERVE FOR PARTITION 1 ('D:'),
THE REMAINING SPACE WILL BE ASSIGNED TO THE NEW PARTITION,
IN MBytes (0 TO EXIT): 400

THE SIZE OF PARTITION 1 ('D:') WILL BE ABOUT 400 MB
THE SIZE OF THE NEW PARTITION WILL BE ABOUT 576 MB
PROCEED (N/Y)?y

HARD DISK PARTITIONING OPERATIONS REQUIRE THAT NO FILES ARE OPENED.
IF SOME FILES ARE CURRENTLY OPENED IN THE SYSTEM,
THE COMMAND WILL WAIT UNTIL ALL FILES WILL BE CLOSED.
PROCEED (N/Y)?y

WAITING THAT ALL FILES GET CLOSED (TYPE CTRL+C + ENTER TO STOP)... DONE.

NEW PARTITION CREATION IN PROGRESS... DONE.

PARTITION 1 ('D:') SUCCESSFULLY SPLITTED ON HARD DISK '4'
PARTITION 2 ('E:') SUCCESSFULLY CREATED ON HARD DISK '4'

DRIVE 'D:' FORMAT IN PROGRESS... DONE.

ENTER VOLUME LABEL (MAX. 11 CHARACTERs, PRESS <ENTER> FOR NO LABEL): usb_drive

DRIVE 'D: FORMATTED:

 FILE SYSTEM IS FAT-32, Size: 976 MB
 Bytes per sector: 512, Sectors per cluster: 4, Clusters: 500054
 Serial N. 3E35-7630, Label: USB_DRIVE

5.13.20. SYS DISK PARTITION RESET

It resets all existing partition(s) for the specified disk.

[15:01:10] ABILIS_CPX:sys disk partition reset hd:4

Hard Disk '4' information:

HD  Size          Partition Drive Label       FAT     Size        Bootable
-------------------------------------------------------------------------------
4   984 MB        1         D:    PENDRIVE    32      976 MB      YES

DO YOU REALLY WANT TO DELETE ALL EXISTING PARTITIONs ON HARD DISK '4' (N/Y)?y

THIS OPERATION WILL DELETE ALL EXISTING PARTITIONs AND CREATE
A SINGLE NEW PARTITION ON HARD DISK '4'.
PROCEED (N/Y)?y

HARD DISK PARTITIONING OPERATIONS REQUIRE THAT NO FILES ARE OPENED.
IF SOME FILES ARE CURRENTLY OPENED IN THE SYSTEM,
THE COMMAND WILL WAIT UNTIL ALL FILES WILL BE CLOSED.
PROCEED (N/Y)?y

WAITING THAT ALL FILES GET CLOSED (TYPE CTRL+C + ENTER TO STOP)... DONE.

CREATING A SINGLE NEW PARTITION ON HARD DISK '4'... DONE.
PARTITION 1 ('D:') SUCCESSFULLY CREATED ON HARD DISK '4'

DRIVE 'D:' FORMAT IN PROGRESS... DONE.

ENTER VOLUME LABEL (MAX. 11 CHARACTERs, PRESS <ENTER> FOR NO LABEL): drive1

DRIVE 'D: FORMATTED:

 FILE SYSTEM IS FAT-32, Size: 980 MB
 Bytes per sector: 512, Sectors per cluster: 4, Clusters: 501837
 Serial N. 3E35-7851, Label: DRIVE1

COMMAND COMPLETED

5.13.21. SYS SET BOOT VERSION

This command allows to change Boot Manager configuration setting the version that must be loaded at next system startup.

The list of available versions can be displayed by sys display versions command; while the current/new Boot Manager configuration is displayed by sys display boot command.

[15:43:26] ABILIS_CPX:sys display boot

Abilis CPX Boot Manager configuration:

Previous version      Current version       Next Version to load  
------------------------------------------------------------------------------
7-9-14                8-0-0                 8-0-0                 


[15:43:26] ABILIS_CPX:sys set boot version 8-0-2

BOOT MANAGER CONFIGURATION UPDATED:
THE NEXT VERSION THAT WILL BE LOADED IS '8-0-2'.

COMMAND EXECUTED

[[15:43:26] ABILIS_CPX:sys display boot

Abilis CPX Boot Manager configuration:

Previous version      Current version       Next Version to load
------------------------------------------------------------------------------
7-9-14                 8-0-0                 8-0-2

5.13.22. SYS DISPLAY BOOT LOG

This command allows to show some information about Abilis boot. Every time Abilis CPX boots a log, showing the date and time, is generated.

[14:14:57] ABILIS_CPX:d t

Current Local Time        : Wednesday 22/04/2015 12:19:20 (UTC+2.00)
Local Time Zone           : CET - Central Europe (Rome, Paris, Berlin, Pragu...
Currently Observing       : Daylight Savings Time (DST)
Clock Reference           : SNTP
Clock Reference state     : Working
Clock last synchronized   : 22/04/2015 at 11:45:42 Delta:-1 sec.

[14:15:00] ABILIS_CPX:warm start

PROCEED WITH WARM START (N/Y)?y

...

[14:16:37] ABILIS_CPX:sys display boot log

Boot Manager log file:

...

***** New run at 2015-04-16 11:44:46 +0200 *****
CPX Boot manager: v. 2034    - 04/10/2013
Setting current directory
Loading configuration
Loading CPX response file
Accepting 'new' version
Saving configuration
Removing CPX response file
Writing info to shared region
Loading file: 8-0-2\CPX.RTB
Starting loaded RTB file

5.13.23. WARM START

This command immediately executes the system restart.

[11:38:04] ABILIS_CPX:warm start
  • If in the current session the configuration was modified but not saved, the command displays a warning message and queries the User for proceeding with configuration saving or not.

    In case of an affirmative answer, the save conf command is executed, the reset of the Abilis CPX isn't executed and the Control Port prompt is shown.

    [11:38:04] ABILIS_CPX:warm start
    
    THE CURRENT CONFIGURATION WAS MODIFIED BUT NOT SAVED.
    PROCEED WITH 'SAVE CONF' COMMAND (N/Y/A)?y
    
    VALIDATION IN PROGRESS...
    VALIDATION SUCCESSFULLY EXECUTED
    
    SAVE EXECUTED
  • If a different version of the currently running one was set to be loaded at next system startup (sys set boot version), the command displays a warning message and queries the User for proceeding with system restart.

    [11:38:04] ABILIS_CPX:warm start
    
    BOOT MANAGER CONFIGURATION WAS MODIFIED:
    THE NEXT VERSION THAT WILL BE LOADED IS '8-0-2',
    WHILE THE CURRENTLY RUNNING VERSION IS '8-0-0'.
    
    PROCEED WITH WARM START (N/Y)?y
  • The options of warm start command:

    [11:38:04] ABILIS_CPX:warm start ?
    
    WARM START [opt]              System warm start is executed
    
    Allowed options:
    
    -DELAY hh:mm   The system will reboot after the specified delay,     <Optional>
                   where 'hh' [0..2400], 'mm' [0..59].
    -NOCALL        The system will reboot as soon as all CTI calls are   <Optional>
                   closed.
    -CLEAR         Clear any scheduled system reboot.                    <Optional>
    -SHOW          Show currently set system reboot delay or condition.  <Optional>
    -F             Force system warm start interrupting any operation    <Optional>
                   in progress (E.g. configuration saving, system
                   updating, file uploading/downloading and so on).
[Note]Note

The -f option, force system warm start interrupting any operation that is in progress (e.g. Configuration saving, system updating, file uploading/downloading and so on).

[11:38:04] ABILIS_CPX:warm start -f

ATTENTION!
FORCING "WARM START" IS DANGEROUS BECAUSE ANY OPERATION IN PROGRESS
WILL BE SUDDENTLY INTERRUPTED, SIMILARLY TO A POWER OFF EVENT.
THIS ACTION CAN CAUSE FILES CORRUPTION.
PROCEED ANYWAY WITH WARM START (N/Y)?y

In case of affirmative answer, the reset of the Abilis CPX is executed, while in case of negative answer the Control Port prompt is shown.