41.2. FTP tables

The access to FTP resources is based on:

41.2.1. Users table

Users can access to FTP server only if they're enabled to FTP service (parameter FTP set to YES).

[17:13:00] ABILIS_CPX:d user

- Not Saved (SAVE CONF) -------------------------------------------------------
------------------------+-------------+----------------------------------------
USER             PWD ACT|CTIP CLUS    |CHAT LDAP PPP FTP HTTP MAIL IAX SIP VO
------------------------+-------------+----------------------------------------
admin            *** YES #    #        YES  YES  YES YES YES  NO   NO  NO  NO
ftpuser          *** YES #    #        NO   NO   NO  YES NO   NO   NO  NO  NO
guest                NO  #    #        NO   NO   NO  NO  NO   NO   NO  NO  NO

Type the command d user:<user> to show the detailed user configuration parameters.

[17:13:05] ABILIS_CPX:d user:ftpuser

Parameter:          | Value:
--------------------+----------------------------------------------------------
USER:                 ftpuser
REAL-NAME:            ftpuser
ID:                   7             <Read Only>
PWD:                  ***
ACT:                  YES
GROUP:                
CTIP:                 #
CLUS:                 #
ADDRBOOK-SYNC:        SYS           
ADDRBOOK-NUMBER:      AUTO          
ADDRBOOK-OUTDIAL:     NONE          
ADDRBOOK-PUB-ENABLED: SYS  
IO-MAP:               #         
OPC-ROLE:             USER
OPC-VIEW:             *
OPC-HIDE-NUMBERS:     NO
OPC-MONITOR:          NONE
OPC-PRIVACY:          NO
CHAT:                 NO    
CHAT-USER:            SYS
CHAT-PWD:             SYS
FTP:                  YES   
FTP-HOMEDIR:          
FTP-PROT:             PLAIN,SSL
-------------------------------------------------------------------------------

Meaning of the parameters:

FTP

Enable/disable FTP for this user [NO, YES]. "!" means that the service is not activated due to Licence restrictions.

FTP-HOMEDIR

FTP home directory, initiating and terminated by the '/' (slash). Max 128 chars. Spaces require double quotes (E.g. "/str2 str3/")

FTP-PROT

FTP protocol [PLAIN: not encrypted; SSL: encrypted]. Values can be joined using ',' character.

41.2.2. FTP Virtual Root Paths table

FTP Virtual Paths Table specifies the association between virtual paths and their respective physical paths.

Virtual paths can be added/set/displayed/cleared with the commands:

a/s/d/c ftp path:<virtual path> [phys-path:<physical path>]

The whole table can be shown with the following command. By default the table contains the following entries:

[17:16:13] ABILIS_CPX:d ftp path

Parameter:  | Value:
------------+------------------------------------------------------------------
PATH:         /pub/
PHYS-PATH:    C:\USR\PUB\
-------------------------------------------------------------------------------
PATH:         /pub2/
PHYS-PATH:    D:\USR\PUB\
-------------------------------------------------------------------------------
PATH:         /usr/
PHYS-PATH:    C:\USR\
-------------------------------------------------------------------------------
PATH:         /usr2/
PHYS-PATH:    D:\USR\
-------------------------------------------------------------------------------

To show a specific path:

[17:25:52] ABILIS_CPX:d ftp path:/pub/

Parameter:  | Value:
------------+------------------------------------------------------------------
PATH:         /pub/
PHYS-PATH:    C:\USR\PUB\
-------------------------------------------------------------------------------

Meaning of the parameters:

PATH

Specifies a virtual directory path with UNIX notation. Virtual path / needs not to be specified because / does never refer to physical path, it is only the “container” of virtual paths. Max 32 chars. Spaces require double quotes (E.g. "/My dir/")

PHYS-PATH

Physical path. Full path with drive letter ['C'..'Z'] terminated by '\'. Max 128 chars. Spaces require double quotes (E.g. "C:\My dir\").

41.2.3. FTP Virtual Paths Access Rights table

This table specifies the associations between virtual paths, users and their respective access rights.

Access rights for a specific virtual path can be added/set/displayed/cleared with the following commands.

a ftp rights path:<virtual path> |id:<id>

Adds the path only.

a ftp rights path:<virtual path> |id:<id> [user:<user> file:<file rights> dir:<dir rights> recur:yes|no mode:plain,ssl]

Adds user and path.

s ftp rights path:<virtual path> |id:<id> user:<user> [file:<file rights> dir:<dir rights> recur:yes|no mode:plain,ssl]

Sets rights and other parameters for an already existent user.

c ftp rights path:<virtual path> |id:<id> user:<user>

Deletes an existing user; if the user is the last one the path isn't deleted.

d ftp rights

Displays rights summary.

d ftp rights path:<virtual path> | id:<id>

Displays rights for a specific path.

d ftp rights user:<user>

Displays rights that a user has on all paths; the paths for which the user isn't defined are skipped.

An example of the output (by default the table contains the following entries):

[17:53:58] ABILIS_CPX:d ftp rights

-------------------------------------------------------------------------------
ID: PATH:
       USER:                            FILE: DIR:  RECUR: PROT:
-------------------------------------------------------------------------------
  1 /pub/
       admin                            rwdn  lcdn  YES    PLAIN,SSL
       anonymous                        r---  l---  YES    PLAIN,SSL
-------------------------------------------------------------------------------
  2 /pub2/
       admin                            rwdn  lcdn  YES    PLAIN,SSL
       anonymous                        r---  l---  YES    PLAIN,SSL
-------------------------------------------------------------------------------
  3 /sysdrives/
       admin                            rwdn  lcdn  YES    PLAIN,SSL
-------------------------------------------------------------------------------
  4 /usr/
       admin                            rwdn  lcdn  YES    PLAIN,SSL
-------------------------------------------------------------------------------
  5 /usr2/
       admin                            rwdn  lcdn  YES    PLAIN,SSL
-------------------------------------------------------------------------------

The rights are split in “file rights” and “directory rights” and are configured/viewed with two different parameters: FILE and DIR.

Table 41.1. FILE parameters values

RWDN
ReadWriteDeleteRename

Table 41.2. DIR parameters values

LCDN
ListCreateDeleteRename

The syntax is:

FILE:[+|-R][+|-W][+|-D][+|-N] DIR:[+|-L][+|-C][+|-D][+|-N]

  • The + sets granted right.

  • The - sets denied right.

  • If + or - isn't specified, the value + is assumed, so it may be omitted.

  • Not specified right is left unchanged.

  • FILE and DIR values do not care about the characters' position.

  • FILE and DIR values are case insensitive.

The following commands are equivalent:

  1. S FTP RIGHTS PATH:/ USER:test FILE:+R+W+D+N

    S FTP RIGHTS PATH:/ USER:test FILE:rwdn

    S FTP RIGHTS PATH:/ USER:test FILE:NdwR

  2. S FTP RIGHTS PATH:/ USER:test FILE:+D-N

    S FTP RIGHTS PATH:/ USER:test FILE:D-N

    S FTP RIGHTS PATH:/ USER:test FILE:-ND