45.2. VS tables

45.2. VS tables
	Chapter 45. VS - Video Surveillance

45.2.1. Camera table

The camera table holds the information about the IP cameras (up to 5).

[11:02:19] ABILIS_CPX:d vs camera

-------------------------------------------------------------------------------
ID:     |[DESCR:]
ENABLED:|NAME:             |USER:                             |PWD:
        |HOST:
        |PORT:             |MEDIA-FORMAT:   |WIDTH:  |HEIGHT: |JPEG-Q:
        |MEDIA-URL:
        |ADD-URL-PARAMS:   |REC-TIME:
-------------------------------------------------------------------------------
0        desktop
YES      192.168.001.111
         80                 MJPEG            640      480      50
         /axis-cgi/mjpg/video.cgi
         YES                1
-------------------------------------------------------------------------------

Meaning of the most important parameters:

ENABLED: Enable/disable this entry usage [NO, YES].
NAME: The name of the camera. From 0 up to 16 Alphanumeric extended characters. Case is preserved. Spaces are allowed. Strings holding spaces must be written between quotation marks (E.g. "str1 str2").
HOST: The IP or FQDN of the IP camera."#" or [1-126.x.x.x, 127.0.0.1, 128-223.x.x.x] or FQDN host name of max. 64 characters in the range ['0'..'9', 'a'..'z', '-', '.' ]. FQDN name is forced to lower case.
PORT: The port of the HTTP service of the camera [1..65535].
MEDIA-FORMAT: The format of the media (image/video) [MJPEG, JPEG].
MEDIA-URL: Full path of the JPEG image or the MJPEG video. From 0 up to 70 characters. Case is preserved. Spaces are allowed. Strings holding spaces must be written between quotation marks (E.g. "/jpg/my image.jpg" or "/mjpg/my video.mjpg").
WIDTH: The width of the media source [0..65535].
HEIGHT: The heght of the media source [0..65535].
JPEG-Q: The JPEG quality [1..100].
ADD-URL-PARAMS: If set, the parameters of the camera (resolution, compression and frame rate) are appended to the requested media URL. To be used only with AXIS cameras. [NO, YES].
REC-TIME: The time of circular recording [0..65535 hours].
USER: Username of the account to access the camera.
PWD: Password of the account to access the camera.

	Caution
	To activate the changes, please execute the initialization command init res:vs

45.2.2. Alarm table

The camera table holds the information about the alarms related to an IP cameras (up to 16 configurable alarms) .

[15:40:44] ABILIS_CPX:d vs alarm

-------------------------------------------------------------------------------
ID: |[DESCR:]
    |ENABLED:  |CAMERA-ID:  |MONITOR:   |RES:                 |IO:
    |ACTION:                            |TURN-ON-RES:         |TURN-ON-IO:
    |TI1:                               |TI2:
    |TI3:                               |TI4:
    |TI5:
-------------------------------------------------------------------------------
0    YES        0            ON          Gpio-1                D-IN-1
     MAIL                                #
     ALL,00:00-23:59                     #
     #                                   #
     #

Meaning of the most important parameters:

ENABLED

Enable/disable this entry usage [NO, YES].

CAMERA-ID

Idnetifier of the camera [NONE, 0..4].

MONITOR

Alarm/event to be monitored [NONE, ON, OFF, *].

RES

Resource for which the alarm/event is monitored. "#" or "*" or "type-nnn" or "type-*" or the name of a CR (CPX resources) list between single quotes (e.g. * or Gpio-* or Mfio-1 or 'my_res_list').

IO

Input/output line for which the alarm/event is monitored.

#: None;
D-IN-n, where 'n' can be:
- for GPIO Digital IN line [1..64, *];
- for MFIO Digital IN line, [1..7, *].
D-OUT-n, where 'n' can be:
- for GPIO Digital OUT line, [1..64, *];
- for MFIO Digital OUT line, [1..7, *].

	Caution
	Only for Gpio/MfIo resources.

ACTION

Action to be executed when the monitored alarm/event occurs [NONE, MAIL, SMS, DISA-CB, TURN-ON-D-OUT]. Values can be joined using "," operator.

TURN-ON-RES

The resource whose output may be turned on in case of alarm during the whole duration of it. "#" or "Gpio-nnn" or "Mfio-nnn".

TURN-ON-IO

The digital output that may be turned on in case of alarm during the whole duration of it. "#" or "D-OUT-n", where 'n' can be:

for GPIO Digital OUT line, [1..64];

for MFIO Digital OUT line, [1..7].
Caution
Only for TURN-ON-RES not equal to #.

TI1..TI5

Time interval within which the rule is active. The the format is "day,hh:mm-hh:mm", where 'day' can be:

a single day of the week [MO, TU, WE, TH, FR, SA, SU];

a set of days of the week (E.g.: MO+TH or TU+TH+SU);

an interval of days of the week (E.g.: MO-WE or TH-SU);

ALL;

#: disable the time interval.

	Caution
	To activate the changes, please execute the initialization command init res:vs

	Caution
	Only for `TURN-ON-RES` not equal to #.


45.1. VS resource		45.3. Easy configuration guide